YY/T 1294.2-2015Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high purity alumina matrix with zirconia reinforcement (English PDF)
外科植入物 陶瓷材料 第2部分:氧化锆增韧高纯氧化铝基复合材料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 1294.2-2015 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
March 2, 2015
Implementation date
January 1, 2016
Scope
YY/T 1294.2-2015 is the English-translated version of 外科植入物 陶瓷材料 第2部分:氧化锆增韧高纯氧化铝基复合材料.
YY/T 1294.2-2015, identical to ISO 6474-2:2012, is the Chinese pharmaceutical industry specification for zirconia-toughened, high-purity alumina matrix composites used as biocompatible, biostable bone-substitute ceramics in joint replacement.
It covers composites in which alumina is more than 60% by mass, with added zirconia and other defined constituents such as Mg, Y or Ce, and sets their properties and test methods, with strength and fracture toughness requirements that differ from those for pure alumina.
Referenced methods include X-ray fluorescence analysis, density, hardness, flexural strength and SEPB fracture toughness tests, plus hip and knee wear testing. The biocompatibility of the additives is outside its scope and remains the manufacturer's responsibility. Issued on 2 March 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — YY/T 1294.2-2015
National Standard of the People's Republic of China
- ICS
- 11.040.40
- Classification
- C 35
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
Foreword
YY/T 1294 "surgical implants ceramic material" or has plans to release the following sections.
--- Part 1. High-purity alumina-based ceramic material;
--- Part 2. zirconia toughened high purity alumina matrix composites. This section YY/T 1294 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 6474-2:2012 "surgical implants of ceramic materials - Part 2. zirconia toughened high Pure alumina matrix composites "(in English).
The standard international documents and normative references corresponding to the consistency of the following documents.
--- GB/T 21114-2007 Refractories X-ray fluorescence spectroscopy for chemical analysis of cast glass method (ISO 12677. 2003, MOD);
Part 1 wear --- YY/T 0651.1-2008 surgical implant total hip prosthesis. hip wear tester negative Load and displacement parameters and related environmental test conditions (ISO 14242-1:2002, MOD);
--- GB/T 6569-2006 fine ceramic bending strength test method (ISO 14704:2000, MOD);
--- GB/T 16534-2009 fine ceramics at room temperature hardness test methods (ISO 14705:2008, MOD);
--- GB/T 23806-2009 Test method for fracture toughness of fine ceramics unilateral pre-cracked beam (SEPB) method (ISO 15732. 2003, MOD);
--- GB/T 25995-2010 fine ceramics density and porosity test methods (ISO 18754:2003, MOD).
1 Scope
YY/T 1294 provisions of this part of the joint replacement with biocompatible and biostable ceramic bone substitute material (high purity zirconia toughened Performance test methods and corresponding alumina matrix composite material).
The purpose of this section is to provide for a alumina matrix composite, that the proportion of alumina composites with mass fraction of more than 60% On similar materials as described in ISO 6474-1, but adding a certain amount of composite oxide of zirconium and other specific ingredients.
Note: The performance requirements specified in this section is different from ISO 6474-1 in strength and fracture toughness, and increased the number for zirconia-containing material Particular requirements (see ISO 13356).
It lists the additive ingredients in the chemical composition of the provisions of this Part. For alumina or zirconia ceramics typical additives Mg, Y, Ce and the like. These additives help to improve alumina - zirconia composite mechanical properties and chemical stability. This section does not include Include inorganic additive in humans biocompatibility evaluation (see ISO 10993-1). In accordance with a specific evaluation framework in this section to production Biocompatible composite ceramic material is the manufacturer's responsibility.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 6474-1 Implants for surgery - Ceramic materials - Part 1. High-purity alumina-based ceramic material (Implantsforsurgery- Ceramicmaterials-Part 1. Ceramicmaterialsbasedonhighpurityalumina)
ISO 12677 refractories X-ray fluorescence spectrometry (XRF) method for chemical analysis of cast glass (Chemicalanalysisof refractoryproductsbyX-rayfluorescence (XRF) -Fusedcastbeadmethod)
ISO 13356 Implants for surgery yttria-stabilized tetragonal zirconia (Y-TZP) ceramic materials (Implantsfor surgery-Ceramicmaterialsbasedonyttria-stabilizedtetragonalzirconia (Y-TZP))
ISO 14242-1 Implants for surgery - Wear of total hip joint prostheses - Part 1. Load and displacement parameters for wear testing machines and corresponding The test environment condition (Implantsforsurgery-Wearoftotalhip-jointprostheses-Part 1. Loadinganddis-placementparametersforwear-testingmachinescorrespondingenvironmentalconditionsfortest)
ISO 14243-1 Implants for surgery - Wear of total knee prostheses - Part 1. load control and load displacement Wear Testing Machine Test parameters and corresponding environmental conditions (Implantsforsurgery-Wearoftotalknee-jointprostheses-Part 1. Loadinganddisplacementparametersforwear-testingmachineswithloadcontrolandcorresponding enviormentalconditionsfortest)
Test methods ISO 14704 Fine ceramics (advanced ceramics, advanced technical ceramics) at room temperature flexural strength of monolithic ceramics (Fine ceramics (advancedceramics, advancedtechnicalceramics) -Testmethodforflexuralstrengthof monolithicceramicsatroomtemperature.)
ISO 14705 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for monolithic ceramics at room temperature hardness [Fineceramics (Advancedceramics, advancedtechnicalceramics) -Testmethodforhardnessofmonolithicceramics atroomtemperature]
ISO 15732 Fine ceramics (advanced ceramics, advanced technical ceramics) measured at room temperature bulk Tao unilateral pre-existing cracks beam method (SEPB)
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 6474-1 · ISO 12677 · ISO 13356 · ISO 14242-1 · ISO 14243-1 · ISO 14705 · ISO 15732
Similar standards
How to Download YY/T 1294.2-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YY/T 0297-2026 — General requirements for clinical investigation of medical devices
YY/T 0463-2026 — Dentistry - Refractory investment and die materials
YY/T 0479-2026 — Medical diagnostic X-ray tube assemblies and X-ray source assemblies - Determination of maximum symmetric radiation field
YY/T 1294.2-2015
$205.00