Valid

YY/T 1127-2006Rongeur (English PDF)

咬骨钳

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YY/T 1127-2006 in 30 minutes.

Issued by

NMPA

Level / Type

Industry · Recommended

Issue date

June 19, 2006

Implementation date

May 1, 2007

Scope

YY/T 1127-2006 is the English-translated version of 咬骨钳.

YY/T 1127-2006 is the Chinese standard "Rongeur". Its scope clause reads: This standard specifies the types and basic dimensions, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage of rongeurs.

This standard is applicable to rongeurs for cutting or correcting bones. Its clauses include types and basic dimensions, materials.

Found what you need?

Document preview — YY/T 1127-2006

National Standard of the People's Republic of China

ICS: 11.040.30
Replacing: YY 91128-1999

Issued by: National Medical Products Administration of the People's Republic of China

Foreword
1 Scope
2 Normative references
3 Types and basic dimensions, materials
4 Requirements
5 Test methods
6 Inspection rules
7 Marking
8 Packaging, transportation and storage

1 Scope

This standard specifies the types and basic dimensions, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage of rongeurs.

This standard is applicable to rongeurs for cutting or correcting bones.

2 Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding correction) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For any undated references, the latest edition of the normative document referred to applies.

GB/T 230.1 Metallic Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508.1:1999, MOD)

GB/T 1220 Stainless steel wires (GB/T 1220-1992, neq JIS G4303:1988)

GB/T 1910-1999 Newsprint

GB/T 2828.1 Sampling procedures for inspection by attributes - Part1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2003; ISO 2859.1-1:1999, IDT)

GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)

QB/T 1315-1991 Thick board

QB/T 3523 Ivory board

YY/T 0149-2006 Medical instruments of stainless steel - Test methods of corrosion resistance (ISO 13401:1995, MOD)

YY/T 1052 Marking requirements for surgical instruments

3 Types and basic dimensions, materials

3.1

The types and basic dimensions of rongeurs shall be in accordance with those specified in Figures 1 to 6 and Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

QB/T 1315-1991 · QB/T 3523

Editions of YY/T 1127

Edition	Title	Revision	Status
YY/T 1127-2006	Rongeur	current edition	Current
YY 91128-1999	Rongeur	previous edition	Superseded

This page sells the current edition, YY/T 1127-2006. Earlier editions are listed for reference only.

How to Download YY/T 1127-2006

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.