YY/T 0926-2014Quantitative analysis of DEHP in PVC medical devices (English PDF)
医用聚氯乙烯医疗器械中邻苯二甲酸二(2-乙基己基)酯(DEHP)的定量分析
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0926-2014 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
June 17, 2014
Implementation date
July 1, 2015
Scope
YY/T 0926-2014 is the English-translated version of 医用聚氯乙烯医疗器械中邻苯二甲酸二(2-乙基己基)酯(DEHP)的定量分析.
YY/T 0926-2014 is the Chinese pharmaceutical industry standard that gives the method for determining the content of the plasticizer DEHP in a medical device made of PVC.
The substance is first identified by thin layer chromatography and then determined quantitatively by ultraviolet spectrophotometry, and the standard sets out the reagents, the extraction of the sample, the chromatographic and spectrophotometric conditions and the calculation of the content. Issued on 17 June 2014, it has applied since 1 July 2015.
Found what you need?
Document preview — YY/T 0926-2014
National Standard of the People's Republic of China
- ICS
- 11.040.30
- Classification
- C 31
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 4 Reagents and Preparation of the solution
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Introduction
Bis (2-ethylhexyl) phthalate (DEHP) is the manufacture of medical devices polyvinyl chloride (PVC) material more commonly used plasticizer One agent. It can improve the cold resistance and the flexibility of plastic, lowering the softening temperature and improve the processing performance.
The technical content of the standard reference to the 2010 edition of "European Pharmacopoeia" the relevant methods, test methods and general principles of a "People's Republic Pharmacopoeia "2010 edition. PVC medical devices phthalate Quantitative analysis (2-ethylhexyl) phthalate (DEHP) of […]
1 Scope
This standard gives a method of PVC medical devices DEHP content determination. First by TLC qualitative, then using UV spectrophotometry to quantify.
Note: You can also use other suitable method, subject to the necessary verification methodology.
This standard applies to the use of DEHP as a plasticizer in the manufacture of PVC medical devices.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. People's Republic of China Pharmacopoeia 2010 Edition (two)
Principle 3 Ether in a reflux condenser apparatus in a sample DEHP extraction, after extraction with toluene was evaporated to volume, with the "People's Republic of China And the National Pharmacopoeia "2010 edition two given TLC DEHP in the sample separated from other components and qualitatively, the sample is removed Reconstituted with ether, filtered and the filtrate evaporated with anhydrous ethanol content by UV spectrophotometry DEHP content.
4 Reagents and Preparation of the solution
4.1 Ether
AR.
4.2 Toluene
AR.
4.3 Ethanol
AR.
4.4 DEHP standard
Purity of not less than 99.0% (CAS number. 117-81-7).
4.5 DEHP reference solution
Precision Weigh DEHP standard 20mg, dissolved and diluted with toluene to 10mL.
4.6 DEHP standard solution
Precision Weigh DEHP standard 20mg, anhydrous ethanol dissolved and diluted to 10mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
PRC Pharmacopoeia 2010 edition (Volume 2)
Similar standards
How to Download YY/T 0926-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YY/T 0297-2026 — General requirements for clinical investigation of medical devices
YY/T 0463-2026 — Dentistry - Refractory investment and die materials
YY/T 0479-2026 — Medical diagnostic X-ray tube assemblies and X-ray source assemblies - Determination of maximum symmetric radiation field
YY/T 0926-2014
$85.00