YY/T 0914-2015Dentistry—Laser welding (English PDF)
牙科学 激光焊接
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0914-2015 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
March 2, 2015
Implementation date
January 1, 2016
Scope
YY/T 0914-2015 is the English-translated version of 牙科学 激光焊接.
YY/T 0914-2015 is the Chinese pharmaceutical industry standard for laser welding in the dental laboratory, as used on metal prostheses and prosthetic devices.
It specifies the performance requirements and the test methods, covering the welded joint and its strength, the penetration and the freedom from porosity and cracks, the effect of the weld on the corrosion resistance of the metal, and the information the manufacturer of the filler material must supply. Issued on 2 March 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — YY/T 0914-2015
National Standard of the People's Republic of China
- ICS
- 11.060.10
- Classification
- C 33
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Requirements
- 4.1 Chemical composition
- 4.2 biocompatibility
- 4.4 corrosion
- 5 3 Sampling
- 6 Sample Preparation
- 6.1 General Requirements
- 6.2 tensile test specimens
- 6.3 Corrosion test specimens
- 7.1 appearance inspection
- 7.2 chemical composition
- 7.3 Tensile test
- 7.4 Static immersion corrosion test
- 8 information and instructions
- 9 logo and tag
- 9.1 Identification
- 9.2 Packaging
- 10 test reports (Informative) Appendix A laser welding quality assurance
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses the translation method identical with ISO 28319:2010 "Dentistry laser welding." Correspondence between the consistency of the standards of international documents and normative references of the following documents.
--- GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)
--- GB/T 9258.1-2000 Coated abrasives - Grain size analysis - Part 1. Grain size (idtISO 6344-1.
1998)
--- GB/T 9937 (all parts) oral vocabulary [ISO 1942 (all parts)]
1 Scope
This standard specifies performance requirements in a dental laboratory, and is suitable for metal prostheses and prosthetic devices laser welding material And test methods.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 1942 oral vocabulary (Dentistry-Vocabulary)
ISO 3585 3.3 borate glass properties (Borosilicateglass3.3-Properties)
ISO 3696 for analytical laboratory use specifications and test methods (Waterforanalyticallaboratoryuse-Specification andtestmethods)
ISO 6344-1 coated abrasive grit size analysis - Part 1. Grain size (Coatedabrasives-Grainsize analysis-Part 1. Grainsizedistributiontest)
ISO 10271 Dental metallic materials Corrosion Test Methods (Dentalmetalicmaterials-Corrosiontestmethods)
ISO 22674:2006 Dentistry fixed and repairing metal material (Dentistry-Metalicmaterialsforfixed andremovablerestorationsandappliances)
3 Terms and Definitions
ISO 1942 and ISO 22674 as defined in the following terms and definitions apply to this document.
3.1 Laser welding
In the case where no metal or the filler material (welding), the laser beam as a heat source, a metal material same or different kind of The method of connecting to produce fusion zone by melting metal, the metal together form a connection.
3.2 Brazing
The method of using a heated metal brazing material as a filler material, method of metal material same or different kind of connected.
Note 1. As used liquidus temperature of the brazing material is greater than 450 °C, but less than the melting range brazed metal material. Brazing material by capillary action seepage To be welded into the gap between the metal material in the metallurgical combination of the metal material to be welded are connected.
Note 2. Unlike brazing fusion welding, brazing is not required because the molten metal being welded.
4 Requirements
4.1 Chemical composition
4.1.1 Metal being welded material
Metal being welded material shall conform to ISO 22674:2006 requirements in 5.1 and 5.2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 1942 · ISO 3585 · ISO 3696 · ISO 6344-1 · ISO 10271 · ISO 22674:2006
Similar standards
How to Download YY/T 0914-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YY/T 0297-2026 — General requirements for clinical investigation of medical devices
YY/T 0463-2026 — Dentistry - Refractory investment and die materials
YY/T 0479-2026 — Medical diagnostic X-ray tube assemblies and X-ray source assemblies - Determination of maximum symmetric radiation field
YY/T 0914-2015
$235.00