Valid

YY/T 0912-2015Dentistry—Brazing materials (English PDF)

牙科学 钎焊材料

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YY/T 0912-2015 in 30 minutes.

Issued by

NMPA

Level / Type

Industry · Recommended

Issue date

March 2, 2015

Implementation date

January 1, 2016

Scope

YY/T 0912-2015 is the English-translated version of 牙科学 钎焊材料.

YY/T 0912-2015 is the Chinese pharmaceutical industry standard for the brazing materials used in making metal dental prostheses.

It specifies the performance requirements and the test methods for them, covering the composition and the noble metal content where declared, the solidus and liquidus temperatures, the flow and the wetting of the parent metal, the strength of the brazed joint, the corrosion resistance and tarnish, and the information supplied with the material. Issued on 2 March 2015, it has applied since 1 January 2016.

Found what you need?

Document preview — YY/T 0912-2015

National Standard of the People's Republic of China

ICS
11.060.10
Classification
C 33

Issued by: National Medical Products Administration of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Requirements

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard uses the translation method identical with ISO 9333:2006 "Dentistry brazing material." Correspondence between the consistency of the standards of international documents and normative references of the following documents.

--- GB/T 9258.1-2000 Coated abrasives - Grain size analysis - Part 1. Grain size (idtISO 6344-1.

1998)

--- GB/T 9937 (all parts) oral vocabulary [ISO 1942 (all parts)]

--- GB/T 16886.1-2011 Biological evaluation of medical devices - Part 1. Evaluation of the risk management process and Test (ISO 10993-1:2009, IDT)

--- YY/T 0268-2008 Dentistry Oral Biological evaluation of medical devices Module 1. Evaluation and testing (ISO 7405. 2008, NEQ)

1 Scope

This standard specifies performance requirements and test methods for the preparation of metal prostheses brazing material.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

YY/T 0528-2009 Dental metallic materials corrosion test methods (ISO 10271:2001, IDT)

ISO 1942 oral vocabulary (Dentistry-Vocabulary)

ISO 6344-1 coated abrasive grit size analysis - Part 1. Grain size (Coatedabrasives-Grainsize analysis-Part 1. Grainsizedistributiontest)

ISO 7405 Dental Oral Biological evaluation of medical devices Science Unit 1. Evaluation and testing (Dentistry-Preclinical evaluationofbiocompatibilityofmedicaldevicesusedindentistry-Testmethodsfordentalmaterials)

ISO 10993-1 Biological evaluation of medical devices - Part 1. Evaluation and testing (Biologicalevaluationofmedical devices-Part 1. Evaluationandtesting)

3 Terms and Definitions

As defined in ISO 1942 and the following terms and definitions apply to this document.

3.1 Brazing material

In the process of dental alloys connected by brazing to form a dental prosthesis and prosthetic devices filled alloy material.

3.2 Precious metals noblemetal

Gold, platinum, palladium, ruthenium, iridium, osmium, and rhodium.

3.3 Base metal

All metal elements except precious metals and silver.

4 Requirements

4.1 Chemical composition

4.1.1 Marked components

The manufacturer shall declare all the content is more than 1.0% (mass fraction) of components and should be identified in accordance with 8c) regulations, accurate to 0.1% (mass Volume fraction). The content of greater than 0.1% (mass fraction), but the composition is less than 1.0% (mass fraction), the manufacturer shall 8c) provisions Marked its name or element symbol.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 1942 · ISO 6344-1 · ISO 7405 · ISO 10993-1

Similar standards

How to Download YY/T 0912-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YY/T 0912-2015

$145.00