YY/T 0735.1-2009Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 mL (English PDF)
麻醉和呼吸设备 湿化人体呼吸气体的热湿交换器(HME) 第1部分：用于最小潮气量为250mL
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0735.1-2009 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
November 15, 2009
Implementation date
December 1, 2010
Scope
YY/T 0735.1-2009 is the English-translated version of 麻醉和呼吸设备 湿化人体呼吸气体的热湿交换器(HME) 第1部分：用于最小潮气量为250mL.
YY/T 0735.1-2009 is the Chinese standard "Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 mL".
Its scope clause reads: YY/T 0735 provisions of this part of the tidal volume equal to or greater than 250mL, primarily intended for patient respiratory gas humidification, and to It includes at least one machine port HME (including HME respiratory system with filter) with the relevant requirements, and provides them into Standard Test Method for Evaluation row. Its clauses include terms and definitions.
Found what you need?
Document preview — YY/T 0735.1-2009
National Standard of the People's Republic of China
- ICS
- 11.040.10
- Classification
- C46
Issued by: National Medical Products Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
1 Scope
YY/T 0735 provisions of this part of the tidal volume equal to or greater than 250mL, primarily intended for patient respiratory gas humidification, and to
It includes at least one machine port HME (including HME respiratory system with filter) with the relevant requirements, and provides them into
Standard Test Method for Evaluation row.
2 Normative references
The following documents contain provisions which, through reference YY/T 0735 and become part of the provisions of this section. For dated references,
All subsequent amendments (not including errata content) or revisions do not apply to this section, however, encourage the agreement on this section
Whether the parties can study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 4999-2003 term anesthesia breathing equipment (ISO 4135.2001, IDT)
GB 9706.1-2007 Medical electrical equipment - Part 1. General requirements for safety (IEC 60601-1. 1988, IDT)
GB/T 16273.1-2008 Graphical symbols for equipment Common symbols (ISO 7000.2004, NEQ)
GB 19633 Packaging for terminally sterilized medical devices (GB 19633-2005, ISO 11607.2003, IDT)
YY 1040.1-2003 anesthesia and respiratory equipment - Conical fittings - Part 1. cone and cone sleeve (ISO 5356-1.1996, IDT)
YY 1040.2-2008 anesthesia and respiratory equipment - Conical fittings - Part 2. Threaded cone bearing joints (ISO 5356-2.
1987, IDT)
3 Terms and Definitions
GB/T 4999 and established the following terms and definitions apply YY/T 0735 of this section.
3.1
Reserved part of a patient breath moisture and heat, and in the process of breathing in its return to the respiratory equipment.
3.2
HME patients with respiratory system interface ports.
3.3
HME patient airway connection port.
3.4
HME and auxiliary equipment connected to the port.
Example. assistive devices can be a gas sampling line.
3.5
HME contained when not pressurized volume, minus the volume of all solid elements, minus all internal fittings within the conical volume.
YY/T 0735.1-2009/ISO 9360-1.2000 […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4999-2003Anaesthetic and respiratory equipment Vocabulary
- GB 9706.1-2007Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
- GB/T 16273.1-2008Graphical symbols for use on equipment -- Part 1: Common symbols
- YY 1040.1-2003Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
- YY 1040.2-2008Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors
YY/T 0735 · ISO 4135.2001 · IEC 60601 · ISO 7000.2004 · GB 19633-2005 · ISO 11607.2003 · ISO 5356
Cited by
- YY 0786-2010Particular requirements for medical respiratory humidifiers and respiratory humidifying systems
- YY/T 0735.2-2010Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomised patients
- YY/T 0753.2-2009Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects
How to Download YY/T 0735.1-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 16273.1-2008 — Graphical symbols for use on equipment -- Part 1: Common symbols
GB/T 4999-2003 — Anaesthetic and respiratory equipment Vocabulary
YY 1040.1-2003 — Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
Secure payment via Stripe
Payments accepted
YY/T 0735.1-2009
$265.00