YY/T 0698.5-2009Packaging materials for terminally sterilized medical devices - Part 5: Heat and self-sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods (English PDF)
最终灭菌医疗器械包装材料 第5部分:透气材料与塑料膜组成的可密封组合袋和卷材 要求和试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0698.5-2009 in 30 minutes.
Issued by
SFDA
Level / Type
Industry · Recommended
Issue date
June 16, 2009
Implementation date
December 1, 2010
Scope
YY/T 0698.5-2009 is the English-translated version of 最终灭菌医疗器械包装材料 第5部分:透气材料与塑料膜组成的可密封组合袋和卷材 要求和试验方法.
YY/T 0698.5-2009 is Part 5 of the Chinese series on packaging materials for terminally sterilized medical devices, and covers the heat-sealable and self-sealable pouches and reels made of a porous material (such as medical paper) joined to a plastic film - the peel pouches in which most single-use devices are sterilized, stored and opened at the point of use.
The pouch is the sterile barrier: the porous side lets the sterilant in and out, the film shows the contents, and the seals must hold until the pouch is peeled open, so pouch makers and device manufacturers need common requirements for these products.
This part sets the requirements and test methods for such pouches and reels, within the YY/T 0698 series that specifies the individual packaging materials used to meet GB/T 19633 on packaging for terminally sterilized medical devices.
It has been superseded by YY/T 0698.5-2023, which is also available on this site. Issued by the State Food and Drug Administration on 16 June 2009, it applied from 1 December 2010.
Found what you need?
Document preview — YY/T 0698.5-2009
National Standard of the People's Republic of China
Issued by: State Food and Drug Administration
Contents
- Foreword
- 1 Scope
Foreword
This document was issued on 16 June 2009 by the State Food and Drug Administration, and applied from 1 December 2010.
It has been superseded by YY/T 0698.5-2023, Packaging materials for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods.
It is a YY/T standard: a recommended industry standard of China's pharmaceutical and medical device sector.
1 Scope
YY/T 0698.5-2009 is Part 5 of the Chinese series on packaging materials for terminally sterilized medical devices, and covers the heat-sealable and self-sealable pouches and reels made of a porous material (such as medical paper) joined to a plastic film - the peel pouches in which most single-use devices are sterilized, stored and opened at the point of use. The pouch is the sterile barrier: the porous side lets the sterilant in and out, the film shows the contents, and the seals must hold until the pouch is peeled open, so pouch makers and device manufacturers need common requirements for these products. This part sets the requirements and test methods for such pouches and reels, within the YY/T 0698 series that specifies the individual packaging materials used to meet GB/T 19633 on packaging for terminally sterilized medical devices. It has been superseded by YY/T 0698.5-2023, which is also available on this site. Issued by the State Food and Drug Administration on 16 June 2009, it applied from 1 December 2010.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of YY/T 0698.5
| Edition | Title | Revision | Status |
|---|---|---|---|
| YY/T 0698.5-2023 | Packaging materials for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods | current edition | Current |
| YY/T 0698.5-2009 | Packaging materials for terminally sterilized medical devices - Part 5: Heat and self-sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods | this edition | Superseded |
This page sells the current edition, YY/T 0698.5-2009. Earlier editions are listed for reference only.
How to Download YY/T 0698.5-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YY/T 0698.6-2009 — Packaging materials for terminally sterilized medical devices - Part 6: Paper for the manufacture of sterile barrier systems intended for sterilization by low temperature sterilization processes or irradiation - Requirements and test methods
YY/T 0698.4-2009 — Packaging materials for terminal sterilized medical devices - Part 4: Paper bags—Requirements and test methods
YY/T 0698.7-2009 — Packaging materials for terminally sterilized medical devices - Part 7: Sealable adhesive coated paper for the manufacture of sterile barrier systems for sterilization by ethylene oxide or irradiation - Requirements and test methods
YY/T 0698.5-2009
$125.00