YY 0902-2013Contacting far infrared physiotherapy equipment (English PDF)
接触式远红外理疗设备
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for YY 0902-2013 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Mandatory
Issue date
October 21, 2013
Implementation date
October 1, 2014
Scope
YY 0902-2013 is the English-translated version of 接触式远红外理疗设备.
YY 0902-2013 is the Chinese pharmaceutical industry standard for contacting far infrared physiotherapy equipment, the applicator laid on the skin that treats by far infrared radiation.
It specifies the terms and definitions, the requirements, the test methods, the inspection rules, the marking, the instructions and the rules for packaging, transport and storage, covering the emitted wavelength band and the radiant emittance, the temperature reached at the surface in contact with the patient and its control, the timer, the materials in contact with the skin and the electrical safety. Issued on 21 October 2013, it has applied since 1 October 2014.
Found what you need?
Document preview — YY 0902-2013
National Standard of the People's Republic of China
- ICS
- 11.040.60
- Classification
- C 42
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions GB 9706.1-2007 defined and the following
- 4 Requirements
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard safety requirements for full implementation of the GB 9706.1-2007 "Medical Electrical Equipment Part 1. General requirements for safety," the content.
The structure is different from the material or equipment or components specified in this standard, if they can prove that they achieve the same degree of safety, should be In recognition.
1 Scope
This standard specifies the contact far infrared therapy device (hereinafter referred to as the device) terms and definitions, requirements, test methods, inspection rules, marking Chi, instructions, packaging, transport and storage.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 9706.1-2007 Medical electrical equipment - Part 1. General requirements for safety
GB/T 14710 medical electrical environmental requirements and test methods
GB/T 16886.1 Biological evaluation of medical devices - Part 1. Evaluation and testing Symbols - Part 1 YY/T 0466.1 medical equipment used with medical device labels, labeling and information. General requirements
3 Terms and Definitions
GB 9706.1-2007 defined and the following terms and definitions apply to this document.
3.1 Contacting far infrared physiotherapy equipment
Contactless far infrared physiotherapy equipment contactingfarinfraredphysiotherapyequipment
Energy at a wavelength of 3µm ~ 25µm infrared spectral regions, the face of the patient-related disorder through physical therapy equipment work.
This standard applies to equipment regulations.
This standard does not apply to equipment to far-infrared radiation the way of treatment.
3.2 Face workface
Under normal operating conditions, emitting far infrared energy and the surface in contact with the patient.
3.3 Emissivity
Emissivity The amount of radiation in the object designated with the same temperature T corresponding to the temperature of blackbody radiation ratio.
3.4 Normal emissivity
Face normal direction emissivity is called to the emission rate method.
4 Requirements
4.1 Working conditions
It shall be specified by the manufacturer. If not specified, shall meet the requirements of Chapter 10 of GB 9706.1-2007.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 9706.1-2007Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
- GB/T 14710The environmental requirement and test methods for medical electrical equipment
- GB/T 16886.1Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process
Similar standards
How to Download YY 0902-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 9706.1-2007 — Medical electrical equipment - Part 1: General requirements for safety
GB/T 14710-1993 — The environmental requirements and test methods for medical electrical equipment
GB/T 14710-2009 — The environmental requirement and test methods for medical electrical equipment
YY 0902-2013
$145.00