YY 0711-2009Dental absorbent points (English PDF)
牙科吸潮纸尖
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for YY 0711-2009 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Mandatory
Issue date
June 16, 2009
Implementation date
December 1, 2010
Scope
YY 0711-2009 is the English-translated version of 牙科吸潮纸尖.
YY 0711-2009 is the Chinese pharmaceutical industry standard for dental absorbent points, the paper points used to dry the root canal during endodontic treatment, both the standard and the tapered kind.
It specifies the performance requirements and the test methods for drug-free points supplied sterilized by the manufacturer for single use, covering the dimensions and their tolerances, the absorbency and the rate at which the point takes up fluid, the strength and the freedom from fraying, the freedom from foreign matter and the packaging. Issued on 16 June 2009, it has applied since 1 December 2010.
Found what you need?
Document preview — YY 0711-2009
National Standard of the People's Republic of China
- ICS
- 11.060.10
- Classification
- C 33
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
Foreword
All technical contents of this standard is mandatory.
This standard is identical with ISO 7551:1996 "Dental absorbent paper points." This standard is based on ISO 7551:1996 re-drafted in order to increase operability standards, made editorial changes, and they are It relates to the terms of the margin identified by a single vertical line.
The main differences between the standard and the international standard and the reasons are as follows.
--- Delete references to normative documents ISO 3630-1:1992, the increase in Appendix A, which direct reference to international standards for content.
--- International standard original 4.1 "ISO 3630-1:1992 6.2" to "Appendix A".
--- International Standard Test Method description "If the manufacturer claims that the unopened package is sterile, the manufacturer shall provide 4.5 The statement confirmed that the test method shall be in accordance with local national standards. Without this national standard, the test should be consistent with the United States or European Pharmacopoeia "is replaced by" if the manufacturer claims that the unopened package is sterile, the plant used to demonstrate the use of sterile statement The inspection method should comply with Chinese pharmacopoeia sterility test method. " --- 6.1 Add. "non-sterile samples." --- Delete the original standard "Appendix A (informative)" was changed to "Reference" and the corresponding international standard to our standards.
--- Increase in Appendix A, the ISO 3630-1. 6.2 Content 1992 direct reference to the contents of this standard, to increase maneuverability. Appendix A of this standard is a normative appendix.
Introduction
This standard specifies dental absorbent paper points size and YY 0495-2004 "root canal filling tip" in the corresponding root canal filling tip foot Consistent inches.
This standard does not include the possible biological hazards qualitative and quantitative requirements, but it is recommended in the evaluation of possible biological hazards when, see Khao YY/T 0268 "Dentistry Oral Biological evaluation of medical devices Module 1. Evaluation and testing." Dental absorbent paper points in root canal therapy for drying the root canal or to the administration of the canal. Therefore, the need to use dental absorbent paper points excellent Quality moisture absorption material. They close texture, to form a smooth surface without burrs. To insert the prepared root canal, dental absorbent paper points You must have a certain rigidity, and sufficient standing upright circular cross section. Dental absorbent paper points
1 Scope
This standard specifies performance requirements and test methods for drug-free during root canal treatment of dental absorbent paper points.
The performance requirements apply to dental sterilization sterilization absorbent paper points used by the plant once after. Dental absorbent paper points including standard Absorbent paper points and conical absorbent paper points.
This standard sterility test methods and performance requirements or/or possible biological hazards Not regulated.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
ISO 6360-1. 1985 Dental rotary instruments - digital coding system - Part 1. General characteristics
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.3 Minimum sales package
The minimum package of dental absorbent paper points of sales, including a plurality of paper or one or a plurality of tip sizes.
3.4 Standard taper absorbent point
Having a standard size and standard taper (length change in diameter per mm 0.02mm) paper tip.
4 Requirements
4.1 Standard absorbent paper points size requirements
Standard absorbent paper points should be sized in accordance with Table 1 and Figure 1. In the range of a predetermined size allows different shapes and designs.
Test should refer to Appendix A of the provisions, and in accordance with this standard 6.2 and 6.3.
The tip of the tip of the paper should be rounded, conical or rounded shape. Neck should be a continuous cylindrical or conical, or both. Size should meet Specified in Table 1 together.
4.2 Cone absorbent paper points size requirements
4.2.1 Overview
The size of the cone-shaped absorbent paper points should meet the requirements of Figures 1 and 2. In the range of a predetermined size allows different shapes and designs.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 6360-1
Similar standards
How to Download YY 0711-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YY 0711-2009
$145.00