YS/T 535.9-2009Chemical analysis methods of sodium fluoride. Part 9: Determination of chloride content. The turbidimetric method (English PDF)
氟化钠化学分析方法 第9部分:氯含量的测定浊度法
This is a limited preview
Buy now to download the full PDF (4 pages)
Need quotation for your management?
Get a formal quotation for YS/T 535.9-2009 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
YS/T 535.9-2009 is the English-translated version of 氟化钠化学分析方法 第9部分:氯含量的测定浊度法.
YS/T 535.9-2009 — This section specifies the determination method of chlorine in sodium fluoride. This section applies to the determination of sodium chloride content. Measurement range (mass fraction). >=0.005%.
Found what you need?
Document preview — YS/T 535.9-2009
National Standard of the People's Republic of China
- ICS
- 71.060.50
- Classification
- H 21
- Replacing
- YS/T 535.9-2006
Issued by: Ministry of Industry and Information Technology
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Reagents
- 4.4 Chlorine standard solution
- 5 Instruments
- 6 Sample
- 7 Procedure
- 7.1 Sample
- 7.3 Blank test
- 7.4 Determination
Foreword
YS/T 535 "chemical analysis of sodium fluoride" is divided into 10 parts.
--- Part 1. Determination of the weight of water in the wet method;
--- Part 2. Determination of distillation of fluorine content - thorium nitrate titration volumetric method;
--- Part 3. Determination of silicon content - Molybdenum blue spectrophotometric method;
--- Part 4. Determination of iron content phenanthroline spectrophotometry;
--- Part 5. Determination of soluble sulfate turbidity method;
--- Part 6. Determination of carbonate content - Gravimetric method;
--- Part 7. Determination of acidity and law;
--- Part 8. Water-insoluble content - Gravimetric method;
--- Part 9. Determination of chlorine turbidity method;
--- Part 10. Preparation and storage of test samples.
Part is divided into 9 parts.
The partial replacement of YS/T 535.9-2006 (formerly GB/T 8158.9-1987).
This part is the "determination of the amount of chlorine fluoride chemical analysis of turbidity Law" YS/T 535.9-2006 revision, and YS/T 535.9-Compared to 2006, an increase of equal precision and quality assurance and control content.
The non-ferrous metal part by the National Standardization Technical Committee and centralized.
This part of the Fushun Aluminum Co., Ltd., China Nonferrous Metals Industry Institute of Standards Metrology and Quality is responsible for drafting.
This part of the Fushun Aluminum Co. drafted.
1 Scope
This section specifies the determination method of chlorine in sodium fluoride.
This section applies to the determination of sodium chloride content. Measurement range (mass fraction). >=0.005%.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this section, however, encourage the parties to this part of the research agreement Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
YS/T 535.10-2009 Methods for chemical analysis of sodium fluoride - Part 10. Sample preparation and storage
3 Method summary
In the presence of boric acid, turbidity by precipitation of silver chloride produced was measured.
4 Reagents
4.1 nitric acid (rho = 1.40g/mL).
4.2 boric acid solution (40g/L).
4.3 silver nitrate solution (0.1mol/L).
4.4 Chlorine standard solution
The 14.10mL hydrochloric acid solution (0.100mol/L) moved into 1L volumetric flask, dilute with water to volume, and mix. This solution containing 1mL 0.050mg chlorine.
5 Instruments
Spectrophotometer.
6 Sample
The specimen shall conform YS/T 535.10-2009 4.2 requirements.
7 Procedure
7.1 Sample
7.2 Determination of the number of Two independent measurement and averaged.
7.3 Blank test
Along with sample blank test.
7.4 Determination
7.4.1 The sample (7.1) into a 100mL volumetric flask, add water 60mL and 25mL boric acid solution (4.2) and shaken till it dissolves with
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.
How to Download YS/T 535.9-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YS/T 535.1-2009 — Chemical analysis methods of sodium fluoride. Part 1: Determination of moisture content. Gravimetric method
YS/T 535.10-2009 — Chemical analysis methods of sodium fluoride. Part 10: Preparation and storage of test samples
YS/T 535.11-2020 — Chemical analysis methods of sodium fluoride - Part 11: Determination of sodium fluorosilicate content. Acid-base titration method
Secure payment via Stripe
Payments accepted
YS/T 535.9-2009
$115.00