YS/T 535.1-2009Chemical analysis methods of sodium fluoride. Part 1: Determination of moisture content. Gravimetric method (English PDF)

Foreword

YS/T 535 "chemical analysis of sodium fluoride" is divided into 10 parts.

--- Part 1. Determination of the weight of water in the wet method;

--- Part 2. Determination of distillation of fluorine content - thorium nitrate titration volumetric method;

--- Part 3. Determination of silicon content - Molybdenum blue spectrophotometric method;

--- Part 4. Determination of iron content phenanthroline spectrophotometry;

--- Part 5. Determination of soluble sulfate turbidity method;

--- Part 6. Determination of carbonate content - Gravimetric method;

--- Part 7. Determination of acidity and law;

--- Part 8. Water-insoluble content - Gravimetric method;

--- Part 9. Determination of chlorine turbidity method;

--- Part 10. Preparation and storage of test samples.

This is Part 1.

The partial replacement of YS/T 535.1-2006 (formerly GB/T 8158.1-1987).

This part is YS/T 535.1-2006 "sodium fluoride chemical analysis method for the determination of wet weight of water storage," the amendment and YS/T 535.1-2006 increased compared to the like precision and quality assurance and control content.

The non-ferrous metal part by the National Standardization Technical Committee and centralized.

This part of the Fushun Aluminum Co., Ltd., China Nonferrous Metals Industry Institute of Standards Metrology and Quality is responsible for drafting.

This part of the Fushun Aluminum Co., Ltd.

1 Scope

This section provides the determination of sodium fluoride content in water in the wet.

This section applies to the determination of fluoride content in water in the wet. Measurement range (mass fraction). <=2.00%.

2 Normative references

The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this section, however, encourage the parties to this part of the research agreement Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

YS/T 535.10-2009 Methods for chemical analysis of sodium fluoride - Part 10. Sample preparation and storage

3 Method summary

Sample at 110 °C ± 5 °C dried and tested for loss.

4 Instruments and equipment

4.1 weighing bottle. diameter of about 45mm, flat type.

4.2 electric oven. capable of controlling the temperature of 110 °C ± 5 °C.

5 Sample

The specimen shall conform YS/T 535.10-2009 4.1 requirements.

6 Step, Analysis

7 Calculation of analytical results

According to formula (1) to calculate the mass fraction of water in the wet (%).

100 (1)