Valid

YS/T 520.6-2007Chemical analysis of gallium. Part 6: Determination of tin content. The salicylfluorone cetylrimethylammonium bromide spectrophotometric method (English PDF)

镓化学分析方法 第6部分:锡含量的测定水杨基荧光酮-溴化十六烷基三甲基胺分光光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF (4 pages)

Need quotation for your management?

Get a formal quotation for YS/T 520.6-2007 in 30 minutes.

Issued by

National Development and Reform Commission

Level / Type

National · Recommended

Issue date

November 14, 2007

Implementation date

May 1, 2008

Scope

YS/T 520.6-2007 is the English-translated version of 镓化学分析方法 第6部分:锡含量的测定水杨基荧光酮-溴化十六烷基三甲基胺分光光度法.

YS/T 520.6-2007 — This section provides the determination of tin content in gallium. This section applies to the determination of tin content in gallium. Measurement range. 0.00005% to 0.020%.

Found what you need?

Document preview — YS/T 520.6-2007

National Standard of the People's Republic of China

ICS
77.120.70
Classification
H 14
Replacing
YS/T 520.6-2006

Issued by: National Development and Reform Commission

Contents

  • Foreword
  • 1 Scope
  • 2 Method summary
  • 3 Reagents
  • 3.2 Nitrate (rho1.42g/cm
  • 3.3 Sulfate (rho1.84g/cm
  • 4 Instrument

Foreword

YS/T 520-2007 "Chemical analysis of gallium" Is the YS/T 520-2006 (formerly GB/T 4375-1984) amendments, divided into Part 12.

--- Part 1. Determination of copper content of 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline spectrophotometry

--- Part 2. Determination of lead content of 4- (2-pyridyl) - resorcinol spectrophotometry

--- Part 3. Determination of aluminum content Chromazurol S- tetradecyl pyridine bromide spectrophotometric method

--- Part 4. Determination of iron content of 4,7-diphenyl-1,10-phenanthroline spectrophotometry

--- Part 5. Determination of calcium content nitrous oxide - acetylene flame atomic absorption spectrometry

--- Part 6. Determination of tin content salicylfluorone - cetyl trimethyl ammonium bromide, spectrophotometry

--- Part 7. Determination of silicon content extraction - molybdenum blue spectrophotometric method

--- Part 8. Determination of indium content of ethyl violet spectrophotometry

--- Part 9. Determination of germanium content Phenylfluorone - polyethylene glycol octyl phenyl ether extraction spectrophotometric method

--- Part 10. Determination of zinc content atomic absorption spectrometry

--- Part 11. Determination of mercury content of the cold atomic absorption spectrometry

--- Part 12. lead, copper, nickel, aluminum, indium and zinc Determination of chemical spectroscopy Part is divided into 6 sections.

The partial replacement of YS/T 520.6-2006 (formerly GB/T 4375.6-1984).

This part is YS/T 520.6-2006 "Chemical analysis of gallium - Part 6. Determination of tin content salicylfluorone - bromide Cetyl trimethyl ammonium spectrophotometry "editorial finishing.

The non-ferrous metal part by the National Standardization Technical Committee and centralized.

This standard by the Aluminum Corporation of China Shandong branch responsible for drafting.

Drafters of this section. Chen Jianli, Wang Li set, Qi Yanli, Tian Rui.

The non-ferrous metal part by the National Standardization Technical Committee responsible for the interpretation.

This part of the standard replaces the previous editions are.

--- YS/T 520.6-2006 (formerly GB/T 4375.6-1984).

Chemical analysis of gallium Determination of tin content. Part 6 Salicylfluorone - cetyl trimethyl ammonium bromide Spectrophotometry

1 Scope

This section provides the determination of tin content in gallium.

This section applies to the determination of tin content in gallium. Measurement range. 0.00005% to 0.020%.

2 Method summary

Sample with nitric acid, sulfuric acid dissolution. Potassium iodide in 8mol/L sulfuric acid medium, to extract tin benzene, back-extracted with dilute sulfuric acid. Anti Ascorbic acid reduction of free iodine in 2mol/L sulfuric acid solution, tartaric acid as the catalyst, tin and salicylfluorone - cetyltrimethylammonium Ammonium form a yellow complex. 509nm wavelength spectrophotometer measured absorbance.

3 Reagents

3.1 benzene.

3.2 Nitrate (rho1.42g/cm

3), pure class distinctions.

3.3 Sulfate (rho1.84g/cm

3), pure class distinctions.

3.4 sulfuric acid (1 + 1), pure class distinctions.

3.5 sulfuric acid (1 + 4), pure class distinctions.

3.6 sulfuric acid (1 + 24), pure class distinctions.

3.7 sulfuric acid (1 + 49), pure class distinctions.

3.8 potassium iodide solution (500g/L).

3.9 ascorbic acid solution (100g/L).

3.10 tartaric acid solution (200g/L).

3.11 salicylfluorone solution (0.3g/L). Weigh 0.09g salicylfluorone dissolved in 180mL of ethanol and 0.5mL of sulfuric acid (3.4), diluted with water to 300mL, stored in a brown bottle and set aside.

3.12 cetyl trimethyl ammonium bromide solution. Weigh 1.82g cetyl trimethyl ammonium bromide, dissolved in water and diluted to 500mL.

3.13 Storage tin standard solution. Weigh 1.0000g pure tin [(Sn) >=99.99%], placed in 300mL beaker, add 50mL sulfur Acid (3.3), dissolved by heating and cooling. With sulfuric acid (3.5) and the solution was transferred to 1000mL volumetric flask and dilute to volume, and mix. This solution 1mL containing 1.0mg tin.

3.14 tin standard solution. Pipette 25.00mL tin standard stock solution (3.13) was placed in 250mL volumetric flask, dilute sulfuric acid (3.7) to Volume, and mix. This solution 1mL containing 100µg tin.

3.15 tin standard solution. Pipette 25.00mL tin standard solution (3.14) into 250mL volumetric flask, dilute to the mark with sulfuric acid (3.7) Degree, and mix. 1mL containing 10µg solution tin.

4 Instrument

Spectrophotometer.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.

How to Download YS/T 520.6-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
4 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YS/T 520.6-2007

$174.00