Valid

YS/T 298-2024High titanium slag (English PDF)

高钛渣

Preview PDF

This is a limited preview

Buy now to download the full PDF (14 pages)

Need quotation for your management?

Get a formal quotation for YS/T 298-2024 in 30 minutes.

Issued by

Ministry of Industry and Information Technology of the People's Republic of China

Level / Type

National · Recommended

Issue date

October 24, 2024

Implementation date

May 1, 2025

Scope

YS/T 298-2024 is the English-translated version of 高钛渣.

This document specifies the classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, accompanying documents and order form contents of high titania slag.

It applies to high titania slag produced by electric furnace smelting from ilmenite concentrate, for use in the production of titanium tetrachloride and synthetic rutile.

Found what you need?

Document preview — YS/T 298-2024

National Standard of the People's Republic of China

ICS
77.150.50
Classification
H 64

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification
  • 5 Technical requirements
  • 5.1 Chemical composition
  • 5.2 Moisture
  • 5.3 Particle size
  • 5.4 Appearance quality
  • 6 Test methods
  • 6.1 Chemical composition
  • 6.2 Moisture
  • 6.3 Particle size
  • 6.4 Appearance quality
  • 7 Inspection rules
  • 7.1 Inspection and acceptance
  • 7.2 Lot formation
  • 7.3 Inspection items
  • 7.4 Sampling and sample preparation
  • 7.5 Judgement of inspection results
  • 8 Marking, packaging, transport, storage and accompanying documents
  • 8.1 Marking
  • 8.2 Packaging, transport and storage
  • 8.3 Accompanying documents
  • 9 Contents of the order form
  • Annex A (Normative) Determination of the content of rutile-type titanium dioxide in high titania slag
  • A.1 Principle
  • A.2 Reagents
  • A.3 Test procedure

Foreword

This document was issued on 24 October 2024 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 May 2025.

It replaces YS/T 298-2015, High titanium slag. Apart from structural adjustments and editorial changes, the main technical changes compared with YS/T 298-2015 are as follows:

a) the scope has been changed (see Clause 1; Clause 1 of the 2015 edition);

b) the definition of high titania slag has been changed (see Clause 3; Clause 3 of the 2015 edition);

c) the classification has been changed: grade TZ94 has been deleted and grades TZ88-1, TZ88-2, TZ83, TZ80, TZ78, TZ76 and TZ74 have been added (see Clause 4; Clause 4 of the 2015 edition);

d) requirements for ZrO2, SnO2, Nb2O5 and rutile-type TiO2 have been added (see Table 1);

e) the chemical composition requirements have been changed (see Table 1; Table 1 of the 2015 edition);

f) the particle size requirements have been changed (see Table 2; Table 2 of the 2015 edition);

g) the particle size test method has been changed (see 6.3; 5.3 of the 2015 edition);

h) a sampling and sample preparation table has been added (see Table 3);

i) the sampling and sample preparation requirements for high titania slag have been changed (see 7.4.2; 6.3 of the 2015 edition);

j) a chemical analysis method for rutile-type titanium dioxide has been added (see Annex A).

This document was proposed by and is under the jurisdiction of the National Technical Committee 243 on Nonferrous Metals of Standardization Administration of China (SAC/TC 243).

Drafting organizations: Xinjiang Xiangrun New Material Technology Co., Ltd., Zunyi Titanium Co., Ltd., LB Group Co., Ltd., Xinjiang Xianghe New Material Technology Co., Ltd., Pangang Group (Panzhihua) Titanium Metal Materials Co., Ltd., Fengcheng Qianyu Titanium Industry Co., Ltd., Henan Longxing Titanium Industry Technology Co., Ltd., Chaoyang Jinda Titanium Co., Ltd., Chengde Tianda Vanadium Industry Co., Ltd.

Previous editions: first issued in 1994 as YS/T 298-1994, first revised in 2007 and second revised in 2015; this is the third revision.

Classification: ICS 77.150.50, CCS H 64.

1 Scope

This document specifies the classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, accompanying documents and order form contents of high titania slag.

This document applies to high titania slag produced by electric furnace smelting from ilmenite concentrate, for use in the production of titanium tetrachloride and synthetic rutile.

2 Normative references

The provisions of the following documents constitute essential provisions of this document through the normative references in the text. For dated references, only the edition corresponding to that date applies; for undated references, the latest edition, including all amendments, applies.

GB/T 1480 Metallic powders - Determination of particle size by dry sieving; GB/T 6679 General rules for sampling of solid chemical products; GB/T 6682 Water for analytical laboratory use - Specification and test methods; YS/T 514 (all parts) Methods for chemical analysis of high titanium slag and rutile.

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1 high titania slag: solid granules with a titanium dioxide mass fraction of not less than 74%, obtained by enriching ilmenite concentrate through electric furnace smelting.

4 Classification

According to chemical composition, the product is divided into 13 grades: TZ92-1, TZ92-2, TZ90-1, TZ90-2, TZ88-1, TZ88-2, TZ85-1, TZ85-2, TZ83, TZ80, TZ78, TZ76 and TZ74.

Remaining clauses in the full document

  • 5 Technical requirements
  • 6 Test methods
  • 7 Inspection rules
  • 8 Marking, packaging, transport, storage and accompanying documents
  • 9 Contents of the order form
  • Annex A (Normative) Determination of the content of rutile-type titanium dioxide in high titania slag

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.

Referenced standards

Editions of YS/T 298

EditionTitleRevisionStatus
YS/T 298-2024High titanium slag—Valid
YS/T 298-2015High Titanium Slag—Obsolete
YS/T 298-2007High titanium slage—Obsolete
YS/T 298-1994High-Titanium slag—Obsolete

This page sells the current edition, YS/T 298-2024. Earlier editions are listed for reference only.

How to Download YS/T 298-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
14 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YS/T 298-2024

$165.00