YS/T 298-2015High Titanium Slag (English PDF)

5.4 Appearance quality

The appearance quality inspection of the product shall be carried out by visual examination.

6.1 Inspection and acceptance

6.1.1 The product shall be inspected by the supplier; ensure that the product quality conforms to the provisions of this Standard and ordering list (or contract);

and fill in the quality certificate.

6.1.2 The purchaser shall inspect the received products according to the provisions of this Standard; when the inspection result is inconsistent with the provisions of this Standard or ordering list (or contract), it shall be proposed to the supplier within 3d from the date of receipt of the product; it shall be solved through the consultation between the supplier and the purchaser. If the arbitration is required, it shall be carried out by entrusting the organization that is jointly approved by the two parties, and shall be jointly sampled by the purchaser.

6.2 Batching

The product shall be delivered in batches; each batch consists of the products with the same designation, the same particle size. The product mass per batch shall be no greater than 110t.

6.3 Sampling

The number of bags is randomly selected from each batch of products. for the large package (1000kg/bag), select 1 bag from 5 bags as the sample, each sample volume shall be no less than 100g; then combine into large sample. For the small package (25kg or 30kg/bag), select 1 bag from 20 bags as the sample, each sample volume shall be no less than 30g; then combine into large sample.

The sampling shall adopt intubation method; taking into consideration of the upper, middle, and lower layers; observe the appearance quality one by one.

7.2 Package, transportation and storage

7.2.1 The product shall be packaged in double-layered bags; the inner layer shall use plastic bag, while the external layer shall use sacks or woven bags.

7.2.2 The product is divided into large and small packages. The new weight per bag of large package is 1000kg; while the net weight per bag of small package is

25kg or 30kg. The bag mouth shall be tightly sealed; it shall not be exposed to the rain or moisture during the transportation and storage processes. When the purchaser has special requirements for the package, it shall be negotiated between the supplier and the purchaser; and indicated in the ordering list (or contract).

7.3 Quality certificate

Each batch of products shall be attached with quality certificate, which shall be indicated as follows.

a) Supplier name, address, telephone and fax;

b) Product name;

c) Batch number, designation, net weight, and quantity;

d) This Standard number;

e) Results of each analysis inspection; and mark from the Quality Supervision

Department of the supplier;

f) Exit-factory date.