YD/T 6086.2-2025800Gb/s intensity modulation pluggable transceiver module - Part 2: 4x200Gb/s (English PDF)
800Gb/s强度调制可插拔光收发合一模块 第2部分:4×200Gb/s
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6086.2-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 2, 2025
Implementation date
November 1, 2025
Scope
YD/T 6086.2-2025 is the English-translated version of 800Gb/s强度调制可插拔光收发合一模块 第2部分:4×200Gb/s.
YD/T 6086.2-2025 is the Chinese standard "800Gb/s intensity modulation pluggable transceiver module - Part 2: 4x200Gb/s". This standard specifies the terms and definitions, abbreviations, and technical requirements for 4 x 200Gb/s 800Gb/s intensity modulation pluggable optical transceiver modules.
It also specifies the photoelectric characteristics, appearance, software, and environmental compliance of the optical modules, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage.
This standard applies to the design, development, production, and inspection of 4 x 200Gb/s 800Gb/s intensity modulation pluggable optical transceiver modules using single-mode fiber.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-07-02, in force from 2025-11-01.
Found what you need?
Document preview — YD/T 6086.2-2025
National Standard of the People's Republic of China
- ICS
- 33.180.01
- Classification
- M33
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 6086.2-2025 was issued by Ministry of Industry and Information Technology on 2 July 2025 and has been in force since 1 November 2025.
It is one of 3 parts of the YD/T 6086 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the terms and definitions, abbreviations, and technical requirements for 4 x 200Gb/s 800Gb/s intensity modulation pluggable optical transceiver modules. It also specifies the photoelectric characteristics, appearance, software, and environmental compliance of the optical modules, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage. This standard applies to the design, development, production, and inspection of 4 x 200Gb/s 800Gb/s intensity modulation pluggable optical transceiver modules using single-mode fiber.
YD/T 6086.2-2025 falls under ICS 33.180.01, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Other parts of this standard:
YD/T 6086.1-2024 — 800Gb/s intensity modulation pluggable optical transceiver module - Part 1: 8×100Gb/s
YD/T 6086.3-2025 — 800Gb/s Intensity modulation pluggable transceiver module - Part 3: 2x400Gb/s CWDM4
Standards on related subjects:
YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC
GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre
GB/T 18480-2001 — Specification for submarine optical fiber cables
YD/T 6087.1-2024 — Optical circuit board components for communication - Part 1: Fiber-optic type
5 Classification and status
International classification (ICS): 33.180.01
Chinese Standard Classification (CCS): M 33
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6086.2-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 6086.3-2025 — 800Gb/s Intensity modulation pluggable transceiver module - Part 3: 2x400Gb/s CWDM4
YD/T 6086.1-2024 — 800Gb/s intensity modulation pluggable optical transceiver module - Part 1: 8×100Gb/s
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 6086.2-2025
$575.00