Valid

YD/T 6086.1-2024800Gb/s intensity modulation pluggable optical transceiver module - Part 1: 8×100Gb/s (English PDF)

800Gb/s强度调制可插拔光收发合一模块 第1部分:8×100Gb/s

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 6086.1-2024 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

October 24, 2024

Implementation date

February 1, 2025

Scope

YD/T 6086.1-2024 is the English-translated version of 800Gb/s强度调制可插拔光收发合一模块 第1部分:8×100Gb/s.

YD/T 6086.1-2024 is the Chinese standard "800Gb/s intensity modulation pluggable optical transceiver module - Part 1: 8×100Gb/s".

This standard specifies the abbreviations, terms and definitions of 8x100Gb/s 800Gb/s intensity modulated pluggable optical transceiver modules, specifies its technical requirements such as optoelectronic characteristics, appearance, software and environmental compliance, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation and storage.

This standard applies to the design, development, production and inspection of 8x100Gb/s intensity modulated pluggable optical transceiver modules. It was issued by Ministry of Industry and Information Technology. Issued on 2024-10-24, in force from 2025-02-01.

Found what you need?

Document preview — YD/T 6086.1-2024

National Standard of the People's Republic of China

ICS
33.180.01
Classification
M33

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 6086.1-2024 was issued by Ministry of Industry and Information Technology on 24 October 2024 and has been in force since 1 February 2025.

It is one of 3 parts of the YD/T 6086 series.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the abbreviations, terms and definitions of 8x100Gb/s 800Gb/s intensity modulated pluggable optical transceiver modules, specifies its technical requirements such as optoelectronic characteristics, appearance, software and environmental compliance, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation and storage. This standard applies to the design, development, production and inspection of 8x100Gb/s intensity modulated pluggable optical transceiver modules.

YD/T 6086.1-2024 falls under ICS 33.180.01, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

YD/T 6086.2-2025 — 800Gb/s intensity modulation pluggable transceiver module - Part 2: 4x200Gb/s

YD/T 6086.3-2025 — 800Gb/s Intensity modulation pluggable transceiver module - Part 3: 2x400Gb/s CWDM4

Standards on related subjects:

YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC

GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre

GB/T 18480-2001 — Specification for submarine optical fiber cables

YD/T 6087.1-2024 — Optical circuit board components for communication - Part 1: Fiber-optic type

5 Classification and status

International classification (ICS): 33.180.01

Chinese Standard Classification (CCS): M 33

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 6086.1-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 6086.1-2024

$560.00