YD/T 4305.3-2025Optical-electric hybrid connector for telecommunication - Part 3: Type single LC (English PDF)
通信用光电混合活动连接器 第3部分:单联LC型
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4305.3-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 2, 2025
Implementation date
November 1, 2025
Scope
YD/T 4305.3-2025 is the English-translated version of 通信用光电混合活动连接器 第3部分:单联LC型.
YD/T 4305.3-2025 is the Chinese standard "Optical-electric hybrid connector for telecommunication - Part 3: Type single LC".
This standard specifies the classification, interface diagrams and mating dimensions, end faces, optical performance, electrical performance, materials, and environmental compliance requirements for single-gang LC type optoelectronic hybrid active connectors used in communication.
It describes the corresponding test methods and specifies the quality assessment procedures, testing rules, marking, packaging, transportation, and storage.
This standard applies to the design, development, production, and inspection of single-gang LC type optoelectronic hybrid active connectors used in applications such as park/indoor wireless, office, and monitoring.
Single-gang LC type optoelectronic hybrid active connectors for other application scenarios can also be used with reference to this standard. It was issued by Ministry of Industry and Information Technology. Issued on 2025-07-02, in force from 2025-11-01.
Found what you need?
Document preview — YD/T 4305.3-2025
National Standard of the People's Republic of China
- ICS
- 33.180.20
- Classification
- L23
Issued by: Ministry of Industry and Information Technology
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Requirements
- 4.1 Classification
- 4.2 Interface graphics and mating dimensions
- 4.3 Other dimensions
- 4.4 Reference optical-electric connectors
- 4.5 Appearance and endface of optical-electric connectors
- 4.6 Optical and electric performance of optical-electric connectors
- 4.7 Materials
- 4.8 Restricted substances
- 5 Quality assessment procedures
- 5.1 Classification
- 5.2 Qualification approval procedures
- 5.3 Quality consistency inspection
- 6 Parameter testing
- 6.1 Environmental requirements
- 6.2 Testing conditions
- 6.3 Testing methods
- 7 Environmental and mechanical reliability tests
- 7.1 Test environment requirements
- 7.2 High temperature aging test
- 7.3 Low temperature storage test
- 7.4 Thermal cycling test
- 7.5 Humidity aging test
- 7.6 Damp heat cycling test
- 7.7 Salt spray test
- 7.8 Vibration test
- 7.9 Mechanical shock
- 7.10 Bending test
- 7.11 Torsion test
- 7.12 Tensile strength test
- 7.13 Tail tension test
- 7.14 Collision test
- 7.15 Mechanical durability test
- 7.16 Repeatability
- 7.17 Hot swap
- 7.18 Interchangeability
- 7.19 Insertion and removal force
- 8 Inspection rules
- 8.1 Inspection classification
- 8.2 End-of-manufacturing inspection
- 8.3 Type inspection
- 9 Signs, packaging, transport and storage
- 9.1 Signs
- 9.2 Packaging
- 9.3 Transport
- 9.4 Storage
1 Foreword
YD/T 4305.3-2025 was issued by Ministry of Industry and Information Technology on 2 July 2025 and has been in force since 1 November 2025.
It is one of 4 parts of the YD/T 4305 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This document specifies requirements of the classification, interface graphics and mating dimensions, endfaces, optical and electric performance, materials and environmental compliance, describes related test methods, and specifies quality assessment procedures, inspection rules, signs, packaging, transport and storage for Type single LC optical-electric hybrid connectors (hereinafter referred to as “optical-electric connectors”). This document is applicable to the design, development, production and inspection of Type single LC optical-electric hybrid connector for telecommunication in the application scenarios of park/indoor wireless, office and monitoring. This document may apply to Type single LC optical-electric hybrid connector for telecommunication in other application scenarios.
YD/T 4305.3-2025 falls under ICS 33.180.20, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 Normative references
GB/T 2828.1 — Sampling procedures for inspection by attributes—Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 26572 — Requirements of concentration limits for certain restricted substances in electrical and electronic products
GB/T 39560
YD/T 1272.1-2018 — Optical fiber connector—Part 1: Type LC
YD/T 1272.3-2015 — Optical fiber connector—Part 3: Type SC
YD/T 2152-2010 — The requirement of reliability and test methods for optical fiber connectors
YD/T 4305.1-2023 — Hybrid optoelectronic connectors for communication - Part 1: Type SC
YD/T 4305.2-2024 — Optical-electrical hybrid connectors for communications - Part 2: Duplex LC type
SJ/T 11364-2014 — Marking for the restriction of the use of hazardous substances in electrical and electronic product
4 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
5 Related standards
Other parts of this standard:
YD/T 4305.1-2023 — Hybrid optoelectronic connectors for communication - Part 1: Type SC
YD/T 4305.2-2024 — Optical-electrical hybrid connectors for communications - Part 2: Duplex LC type
YD/T 4305.4-2024 — Optical-electrical hybrid connectors for communications - Part 4: Type XC
Standards on related subjects:
GB/T 17737.100-2018 — Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements
GB/T 21711.1-2008 — Electromechanical elementary relays -- Part 1: General and safety requirements
6 Classification and status
International classification (ICS): 33.180.20
Chinese Standard Classification (CCS): L 23
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4305.3-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 4305.4-2024 — Optical-electrical hybrid connectors for communications - Part 4: Type XC
YD/T 4305.2-2024 — Optical-electrical hybrid connectors for communications - Part 2: Duplex LC type
YD/T 4305.1-2023 — Hybrid optoelectronic connectors for communication - Part 1: Type SC
YD/T 4305.3-2025
$420.00