YD/T 4305.2-2024Optical-electrical hybrid connectors for communications - Part 2: Duplex LC type (English PDF)
通信用光电混合活动连接器 第2部分:双工LC型
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4305.2-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 5, 2024
Implementation date
October 1, 2024
Scope
YD/T 4305.2-2024 is the English-translated version of 通信用光电混合活动连接器 第2部分:双工LC型.
YD/T 4305.2-2024 is the Chinese standard "Optical-electrical hybrid connectors for communications - Part 2: Duplex LC type".
This standard specifies the classification of duplex LC type optoelectronic hybrid active connectors for communications, interface graphics and matching dimensions, end faces, optical performance requirements, and corresponding test methods, and specifies quality assessment procedures, inspection rules, and other contents.
This standard applies to the design, development, production and inspection of duplex LC type optoelectronic hybrid connectors for communication in application scenarios such as campus/indoor wireless, office, and monitoring.
Duplex LC type optoelectronic hybrid connectors used in other scenarios can also be used for reference. It was issued by Ministry of Industry and Information Technology. Issued on 2024-07-05, in force from 2024-10-01.
Found what you need?
Document preview — YD/T 4305.2-2024
National Standard of the People's Republic of China
- ICS
- 33.180.01
- Classification
- M33
Issued by: Ministry of Industry and Information Technology
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Requirements
- 4.1 Classification
- 4.2 Interface graphics and mating dimensions
- 4.3 Other dimensions
- 4.4 Reference optical-electric connectors
- 4.5 Appearance and endface of optical-electric connectors
- 4.6 Optical and electric performance of optical-electric connectors
- 4.7 Material
- 4.8 Environmental compliance
- 5 Quality assessment procedures
- 5.1 Classification
- 5.2 Qualification approval procedures
- 5.3 Quality consistency inspection
- 6 Parameter testing
- 6.1 Environmental requirements
- 6.2 Testing conditions
- 6.3 Testing methods
- 7 Environmental and mechanical reliability tests
- 7.1 Test environment requirements
- 7.2 High temperature aging test
- 7.3 Low temperature storage test
- 7.4 Thermal cycling test
- 7.5 Humidity aging test
- 7.6 Damp heat cycling test
- 7.7 Salt spray test
- 7.8 Vibration test
- 7.9 Mechanical shock
- 7.10 Bending test
- 7.11 Torsion test
- 7.12 Tensile strength test
- 7.13 Tail tension test
- 7.14 Collision test
- 7.15 Mechanical durability test
- 7.16 Repeatability
- 7.17 Insertion and removal
- 7.18 Interchangeability
- 7.19 Insertion and removal force
- 8 Inspection rules
- 8.1 Inspection duties and responsibilities
- 8.2 Inspection classification
- 8.3 End-of-manufacturing inspection
- 8.4 Type inspection
- 9 Signs, packaging, transport and storage
- 9.1 Signs
- 9.2 Packaging
- 9.3 Transport
- 9.4 Storage
1 Foreword
YD/T 4305.2-2024 was issued by Ministry of Industry and Information Technology on 5 July 2024 and has been in force since 1 October 2024.
It is one of 4 parts of the YD/T 4305 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This document specifies requirements of the classification, interface graphics and mating dimensions, endfaces, optical and electric performance, materials and environmental compliance, describes related test methods, and specifies quality assessment procedures, inspection rules, marking, packaging, transport and storage for Type duplex LC optical-electric hybrid connectors (hereinafter referred to as “optical-electric connectors”). This document is applicable to the design, development, production and inspection of Type duplex LC optical-electric hybrid connector for telecommunication in the application scenarios of park/indoor wireless, office and monitoring. This document may apply to Type duplex LC optical-electric hybrid connector for telecommunication in other application scenarios.
YD/T 4305.2-2024 falls under ICS 33.180.01, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 Normative references
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes—Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 26572-2011 — Requirements of concentration limits for certain restricted substances in electrical and electronic products
GB/T 39560 (all parts) — Determination of certain substances in electrical and electronic products
YD/T 1272.1-2018 — Optical fiber connector—Part 1 : Type LC
YD/T 1272.3-2015 — Optical fiber connector—Part 3 : Type SC
YD/T 2152-2010 — The requirement of reliability and test methods for optical fiber connectors
YD/T 4305.1-2023 — Hybrid optoelectronic connectors for communication - Part 1: Type SC
SJ/T 11364-2014 — Marking for the restriction of the use of hazardous substances in electrical and electronic product
4 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
5 Related standards
Other parts of this standard:
YD/T 4305.1-2023 — Hybrid optoelectronic connectors for communication - Part 1: Type SC
YD/T 4305.3-2025 — Optical-electric hybrid connector for telecommunication - Part 3: Type single LC
YD/T 4305.4-2024 — Part 4: Type XC
Standards on related subjects:
YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC
GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre
GB/T 18480-2001 — Specification for submarine optical fiber cables
6 Classification and status
International classification (ICS): 33.180.01
Chinese Standard Classification (CCS): M 33
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4305.2-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 4305.3-2025 — Optical-electric hybrid connector for telecommunication - Part 3: Type single LC
YD/T 4305.1-2023 — Hybrid optoelectronic connectors for communication - Part 1: Type SC
YD/T 4305.4-2024 — Optical-electrical hybrid connectors for communications - Part 4: Type XC
YD/T 4305.2-2024
$525.00