Valid

YD/T 2568.4-2013LTE digital cellular mobile communication network X2 interface technical requirement. Part 4: application protocol (English PDF)

LTE数字蜂窝移动通信网 X2接口技术要求(第一阶段) 第4部分:应用协议

Preview PDF

This is a limited preview

Buy now to download the full PDF (88 pages)

Need quotation for your management?

Get a formal quotation for YD/T 2568.4-2013 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

January 1, 2013

Implementation date

January 1, 2013

Scope

YD/T 2568.4-2013 is the English-translated version of LTE数字蜂窝移动通信网 X2接口技术要求(第一阶段) 第4部分:应用协议.

YD/T 2568.4-2013 is the Chinese standard "LTE digital cellular mobile communication network X2 interface technical requirement. Part 4: application protocol". This standard specifies the E-UTRAN radio network layer control plane signaling process between the eNB.

X2AP support X2 interface functions by signaling procedures defined in this document. It was issued by Ministry of Industry and Information Technology. It cites 3 other standards.

Found what you need?

Document preview — YD/T 2568.4-2013

National Standard of the People's Republic of China

ICS
33.060.99
Classification
M36

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 2568.4-2013 is issued by Ministry of Industry and Information Technology.

It is one of 5 parts of the YD/T 2568 series.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the E-UTRAN radio network layer control plane signaling process between the eNB. X2AP support X2 interface functions by signaling procedures defined in this document.

YD/T 2568.4-2013 falls under ICS 33.060.99, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.

YD/T 2566.4

YD/T 2566.5

YD/T 2568.5

4 Where this standard sits

It cites 3 standards, listed in full above.

One other standard in this catalogue cites it: YD/T 2568.1-2013.

It is one part of the YD/T 2568 series, of which this catalogue holds 5 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology

English translation: about 88 pages (approximate)

6 Related standards

Other parts of this standard:

YD/T 2568.1-2013 — LTE digital cellular mobile communication network X2 interface technical-requirement. Part 1: general aspects

YD/T 2568.2-2013 — LTE digital cellular mobile communication network X2 interface technical requirement (Phase 1). Part 2: layer 1

YD/T 2568.3-2013 — LTE digital cellular mobile communication network X2 interface technical requirement (Phase 1). Part 3: signalling transport

YD/T 2568.5-2013 — LTE digital cellular mobile communication network X2 interface technical requirement (Phase 1). Part 5: data transport

Standards on related subjects:

GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency

YD/T 2689-2014 — Technical Requirement for LTE based Broadband Trunking Communication(B-TrunC)

GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment

7 Classification and status

International classification (ICS): 33.060.99

Chinese Standard Classification (CCS): M 36

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 88 pages — is available in the English PDF.

Referenced standards

How to Download YD/T 2568.4-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
88 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 2568.4-2013

$2,509.00