YC/T 299-2009Technical specification for pest control of tobacco processing (English PDF)

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

This standard is proposed by the State Tobacco Monopoly Bureau.

This standard replaces YC/T 299-2009 "Technical Specification for Pest Control in Tobacco Processing", compared with YC/T 299-2009.

The changes are as follows.

- the scope of application to increase the recycling of tobacco companies refer to the implementation (see Chapter 1);

- two terms and definitions (see 3.3 and 3.4) for the addition of pharmacy curing and nitrogen control;

- increased pest control requirements (see 4.2), cleaning requirements for containers (see 4.3.4), recommended for wireframe reticulated frames Design (see 6.3.4.3) and cleaning cycle table example (see Appendix A);

- increased pest alarm and pest analysis (see 5.4 and 5.5);

- increased nitrogen control, fumigation and pharmacy cure (see 6.3);

- increased safety and management requirements (see Chapter 7).

This standard is under the jurisdiction of the National Subcommittee on Technical Subcommittee of the National Tobacco Standardization Technical Committee (SAC/TC144/SC4).

The drafting unit of this standard. Xiamen Tobacco Industry Co., Ltd., Yunnan Tobacco Industry Co., Ltd., Shanghai Tobacco Group Co., Ltd.

Any company, Zhejiang tobacco industry limited liability company, Longyan tobacco industry limited liability company, Hubei tobacco industry limited liability company, Jiangxi Tobacco industry limited liability company, Wuhan Dongchang Warehousing Technology Co., Ltd., Sichuan Golden Leaf Biological Control Co., Ltd., Fujian tobacco industry limited liability any company, Henan tobacco industry limited liability company, Guizhou tobacco industry limited liability company.

Introduction

The issuer of this document draws attention to the fact that the statement is in conformity with this document and may involve a patented "Tobacco Beetle Prevention and Control Method" (ZL201110091493.0).

The issuer of this document has no position on the authenticity, validity and scope of the patent.

The holder of the patent has assured the issuing authority of this document that he is willing to cooperate with any applicant on a fair, reasonable and non-discriminatory basis Permit any organization and individual to enforce the patent when implementing the standard. The statement of the patent holder has been filed with the issuing authority of this document. phase Off information can be obtained through the following contact information.

Name of patent holder. Li Yiwei.

Address. Hongshan District, Wuhan City, Luo Yang Road, No. 1077, East Lake Plaza, Park King Court East Tower 16D.

Please note that in addition to the above patents, some of the contents of this document may still involve patents. The issuer of this document does not undertake to identify these specialties Lee's responsibility.

Technical specification for pest control in tobacco processing

1 Scope

This standard specifies the requirements for pest prevention, pest monitoring and pest management during tobacco processing.

This standard applies to cigarette manufacturers, wholesome shovel enterprises and recycling tobacco enterprises with reference to the implementation.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Code for selection of individual protective equipment GB/T 11651 YC/T 384.2-2011 Code of standardization for safe production of tobacco enterprises - Part 2. Safety technology and field regulations

3 Terms and definitions

The following terms and definitions apply to this document.

Health dead angle sanitaryblindspot Difficult to clean or clean easily overlooked position.

Insect monitoring pestmonitoring Use tobacco pest traps to monitor the number and distribution of tobacco pests in the environment.

Pharmacy Curing Control Controlpatebysolidifypestpreservativematerial the method of curing the drug on a safe and degradable carrier material for the control of tobacco pests.

Regulation and control of nitrogen enrichment controledpestsbynitrogenfilingtechnology the equipment, or materials for the breeding of tobacco insects shall be sealed and sealed by plastic, and the sealed plastic tent shall be filled with nitrogen replacement the air inside the curtain, so that the oxygen content of the tent <= 2%.

4 Pest prevention requirements