YC/T 213.5-2006Material for tobacco machinery products. Classifiyling and coding. Part 5: Electric components (English PDF)
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for YC/T 213.5-2006 in 30 minutes.
Issued by
State Tobacco Monopoly Administration
Level / Type
National · Recommended
Issue date
October 13, 2006
Implementation date
October 13, 2006
Scope
YC/T 213.5-2006 (Material for tobacco machinery products. Classifiyling and coding. Part 5: Electric components) is available as an English-translated PDF.
YC/T 213.5-2006 — This part of YC/T 213 specifies the method for compiling the computer code of electrical components. This section applies to the compilation of computer code (hereinafter referred to as code) for electrical components of tobacco machinery products.
Found what you need?
Document preview — YC/T 213.5-2006
National Standard of the People's Republic of China
- ICS
- 65.160
- Classification
- X 04
Issued by: State Tobacco Monopoly Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Coding method
- 3.1 Code composition
- 3.2 How to compile each piece of code in the code composition
- 4 Implementation Guide
Foreword
YC/T 213 "Material Classification and Coding for Tobacco Machinery Products" is divided into six parts.
--- Part 1. General;
--- Part 2. Special parts;
--- Part 3. Mechanical purchased parts;
--- Part 4. Enterprise machinery standard parts;
--- Part 5. Electrical components;
--- Part 6. original and auxiliary materials.
This part is the fifth part of YC/T 213.
Appendix A of this section is a normative appendix.
This part is proposed by the National Tobacco Monopoly Bureau.
This part is under the jurisdiction of the National Tobacco Standardization Technical Committee (TC144).
This section drafted by. Changde Tobacco Machinery Co., Ltd., China Tobacco Machinery Technology Center Co., Ltd., Xuchang Tobacco Machinery Limited liability company.
1 Scope
This part of YC/T 213 specifies the method for compiling the computer code of electrical components.
This section applies to the compilation of computer code (hereinafter referred to as code) for electrical components of tobacco machinery products.
2 Normative references
The terms in the following documents become the provisions of this part by reference to this part of YC/T 213. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section the parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section.
YC/T 213.1-2006 Classification and coding of materials for tobacco machinery products - Part 1. General YC/T 213.2-2006 Classification and coding of materials for tobacco machinery products - Part 2
3 Coding method
3.1 Code composition
The code composition is shown in Figure 1.
Large class code for electrical components (see 3.2.1) Nn Category code (see 3.2.2) Nnn Group code (see 3.2.3) Nnnnn Other feature codes (see 3.2.4) Aa Manufacturing unit code of the product to which the electrical component belongs (see 3.2.5) Note. The letter n in the figure indicates that the bit code is an Arabic numeral (hereinafter referred to as a number), and the letter a indicates that the bit code is a Latin capital letter (hereinafter referred to as a letter).
Figure 1 code composition
3.2 How to compile each piece of code in the code composition
3.2.1 The "Electrical Component Category Code" is indicated by the two-digit number 33 in accordance with the provisions of Chapter 5 of YC/T 213.1-2006.
3.2.2 "Category Code" is indicated by two digits and the category code is given in Appendix A.
3.2.3 "Group Code" is represented by three digits, and group code is shown in Appendix A.
3.2.4 "Other feature codes" are represented by five digits, indicating the standard number or sample, model, specification, etc. performed by the electrical components.
feature.
3.2.5 "Production unit code of electrical components belongs to" is represented by two letters. For the manufacturer's unit code, see YC/T 213.2-Appendix D in 2006.
4 Implementation Guide
4.1 When the electrical component code is used in the computer-aided management system of the enterprise, the first 12-digit code specified in this part should be used.
4.2 When the electrical component code is used for the computer-aided management system outside the enterprise, the 14-digit code specified in this part shall be used.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
How to Download YC/T 213.5-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YC/T 213.1-2006 — Material for tobacco machinery products. Classifying and coding. Part 1: General principles
YC/T 213.2-2006 — Material for tobacco machinery products. Classifying and coding. Part 2: Special-purpose parts
YC/T 213.3-2006 — Material for tobacco machinery products. Classifying and coding. Part 3: Machinery bought-in components
Secure payment via Stripe
Payments accepted
YC/T 213.5-2006
$405.00