Valid

YC/T 213.3-2006Material for tobacco machinery products. Classifying and coding. Part 3: Machinery bought-in components (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (36 pages)

Need quotation for your management?

Get a formal quotation for YC/T 213.3-2006 in 30 minutes.

Issued by

State Tobacco Monopoly Administration

Level / Type

National · Recommended

Issue date

October 13, 2006

Implementation date

October 13, 2006

Scope

YC/T 213.3-2006 (Material for tobacco machinery products. Classifying and coding. Part 3: Machinery bought-in components) is available as an English-translated PDF.

YC/T 213.3-2006 — This part of YC/T 213 specifies the method of compiling the computer code of mechanical purchased parts. This section applies to the preparation of mechanically purchased computer code (hereinafter referred to as code).

Found what you need?

Document preview — YC/T 213.3-2006

National Standard of the People's Republic of China

ICS: 65.160
Classification: X 04

Issued by: State Tobacco Monopoly Administration

Foreword
1 Scope
2 Normative references
3 Preparation method
3.1 Code composition
3.2 How to compile each piece of code in the code composition
4 Implementation Guide

Foreword

YC/T 213 "Material Classification and Coding for Tobacco Machinery Products" is divided into six parts.

--- Part 1. General;

--- Part 2. Special parts;

--- Part 3. Mechanical purchased parts;

--- Part 4. Enterprise machinery standard parts;

--- Part 5. Electrical components;

--- Part 6. original and auxiliary materials.

This part is the third part of YC/T 213.

Appendix A of this section is a normative appendix.

This part is proposed by the National Tobacco Monopoly Bureau.

This part is under the jurisdiction of the National Tobacco Standardization Technical Committee (TC144).

This section drafted by. Changde Tobacco Machinery Co., Ltd., China Tobacco Machinery Technology Center Co., Ltd., Xuchang Tobacco Machinery Limited liability company.

1 Scope

This part of YC/T 213 specifies the method of compiling the computer code of mechanical purchased parts.

This section applies to the preparation of mechanically purchased computer code (hereinafter referred to as code).

2 Normative references

The terms in the following documents become the provisions of this part by reference to this part of YC/T 213. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section the parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section.

YC/T 213.1-2006 Classification and coding of materials for tobacco machinery products - Part 1. General YC/T 213.2-2006 Classification and coding of materials for tobacco machinery products - Part 2

3 Preparation method

3.1 Code composition

The code composition is shown in Figure 1.

Large-scale code for mechanical purchased parts (see 3.2.1) Category code (see 3.2.2) Nn Group code (see 3.2.3) Nn Variety code (see 3.2.4) Nnnnn Other feature codes (see 3.2.5) Aa Manufacturing unit code of the product purchased by the machine (see 3.2.6) Note. The letter n in the figure indicates that the bit code is an Arabic numeral (hereinafter referred to as a number), and the letter a indicates that the bit code is a Latin capital letter (hereinafter referred to as a word).

mother).

Figure 1

3.2 How to compile each piece of code in the code composition

3.2.1 The "Machinery Outsourced Large Class Code" is indicated by the two-digit number 32 as specified in Chapter 5 of YC/T 213.1-2006.

3.2.2 "Category Code" is indicated by one letter, see Appendix A.

3.2.3 "Group Code" is indicated by two digits, see Appendix A.

3.2.4 "Variety Code" is indicated by two digits, see Appendix A.

3.2.5 "Other Feature Codes" are represented by five digits, indicating the standard number or sample, mechanical performance grade, and material performed by the machine purchased parts.

Materials, heat treatment, surface treatment, accuracy grade, tolerance grade, type, specification and other characteristics.

3.2.6 "Production unit code of mechanical purchased parts" is represented by two letters, and the product manufacturing unit code is shown in YC/T 213.2-Appendix D in 2006.

4 Implementation Guide

4.1 When the mechanical purchased parts code is used in the computer-aided management system of the enterprise, the first 12-digit code specified in this part should be used.

4.2 When the mechanical purchased parts code is used for the computer-aided management system outside the enterprise, the 14-digit code specified in this part shall be used.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 36 pages — is available in the English PDF.

How to Download YC/T 213.3-2006

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.