YC/T 11.3-2006Tobacco machinery. Drawing and design document of product. Part 3: Formal (English PDF)

Foreword

YC/T 11 "Tobacco Machinery Product Drawings and Design Documents" is divided into the following eight parts.

--- Part 1. General;

--- Part 2. Basic requirements;

--- Part 3. Format;

--- Part 4. Coding principles;

--- Part 5. Integrity;

--- Part 6. Change method;

--- Part 7. Standardization review;

--- Part 8. Management rules.

This part is the third part of YC/T 11.

This part replaces YC/T 11.3-1993 "Tobacco Machinery Product Drawings and Design File Formats".

Compared with YC/T 11.3-1993, the main changes in this section are as follows.

--- The format of the pattern, the consistency of the filling requirements have been adjusted, and the requirements for the storage code requirements have been added;

--- The design method of the design file is filled in, and the adjustment is basically the same as the filling of the pattern format;

--- The recommended format is adjusted as an appendix, Appendix A is the format of the title bar of the drawing; Appendix B is the drawing list, code column, the format of the additional column; Appendix C is the design file format. Dimensions in various formats are for reference only;

--- Added the format of the CAD file.

Appendix A and Appendix B of this part are normative appendices, and Appendix C is an informative appendix.

This part is proposed by the National Tobacco Monopoly Bureau.

This part is under the jurisdiction of the National Tobacco Standardization Technical Committee (TC144).

This section drafted by. Shanghai Tobacco Machinery Co., Ltd., China Tobacco Machinery Technology Center Co., Ltd.

1 Scope

This part of YC/T 11 specifies the drawings and design documents of tobacco machinery products, including CAD drawings and design documents (hereinafter referred to as drawings).

And documents or CAD files) format and fill in the rules.

This section applies to the format of tobacco machinery products and the format of design documents or CAD files.

2 Normative references

The terms in the following documents become the provisions of this part by reference to this part of YC/T 11. For dated references, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, an agreement is encouraged under this section.

The parties are studying whether the latest version of these documents can be used. For undated references, the latest edition applies to this section.

GB/T 10609.1-1989 technical drawing title bar GB/T 10609.2-1989 Technical drawing list GB/T 14689-1993 technical drawing sheet format and format GB/T 14690-1993 technical drawing ratio GB/T 17825.2-1999 CAD file management basic format GB/T 17825.10-1999 CAD file management storage and maintenance YC/T 11.4-2006 Tobacco machinery product drawings and design documents - Part 4. Numbering principles YC/T 11.6-2006 Tobacco machinery product drawings and design documents - Part 6

3 Product pattern format