YB/T 4328-2012Method for the determination of content of free calcium oxide in steel slag (English PDF)
钢渣中游离氧化钙含量测定方法
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for YB/T 4328-2012 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2012
Implementation date
January 1, 2012
Scope
YB/T 4328-2012 is the English-translated version of 钢渣中游离氧化钙含量测定方法.
YB/T 4328-2012 is the Chinese standard "Method for the determination of content of free calcium oxide in steel slag".
This standard specifies the terms and definitions of free calcium oxide content in steel slag, principles, reagents and materials, equipment, sample preparation, determination of free total calcium, determination of calcium hydroxide, calculation of free calcium oxide content in steel slag, And test report.
This standard applies to carbon steel slag in the free calcium oxide content of the side set. Determination of free calcium oxide range: 0.20% ~ 15.00%. It was issued by Ministry of Industry and Information Technology. It cites 7 other standards.
Found what you need?
Document preview — YB/T 4328-2012
National Standard of the People's Republic of China
- ICS
- 77.140.99
- Classification
- H34
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Test method
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 4328-2012 was issued by Ministry of Industry and Information Technology on 28 December 2012.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 8 pages in English translation.
2 Scope Preview
This standard specifies the terms and definitions of free calcium oxide content in steel slag, principles, reagents and materials, equipment, sample preparation, determination of free total calcium, determination of calcium hydroxide, calculation of free calcium oxide content in steel slag, And test report. This standard applies to carbon steel slag in the free calcium oxide content of the side set. Determination of free calcium oxide range: 0.20% ~ 15.00%.
YB/T 4328-2012 falls under ICS 77.140.99, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
GB/T 6003.1
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170
GB/T 12805
GB/T 12806
GB/T 12807
GB/T 12808
4 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 8 pages (approximate)
5 Related standards
Standards on related subjects:
YS/T 357-2015 — O-Isopropyl-N-ethyl thionocarbamate
YB/T 4201-2009 — Steel slag sand for ready-mixed mortar
YS/T 488-2005 — Sodium (potassium) isobutyl xanthate
YB/T 4405-2026 — Technical specification for the application of blast furnace water-quenched slag sand in concrete and mortar
YB/T 4185-2026 — Technical specification of tailings pre-mixed moratr
YB/T 4329-2012 — Technical specification for application of steel slag fine aggregate used in cement concrete pavement
6 Classification and status
International classification (ICS): 77.140.99
Chinese Standard Classification (CCS): H 34
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6003.1Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
- GB/T 12805Laboratory glassware - Burettes
- GB/T 12806Laboratory glassware - One-mark volumetric flasks
- GB/T 12807Laboratory glassware - Graduated pipettes
How to Download YB/T 4328-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
YB/T 4328-2012
$105.00