Valid

WB/T 1120-2022Service specification for used traction battery recycling (English PDF)

Preview PDF

Also coversWBT1120-2022

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for WB/T 1120-2022 in 30 minutes.

Issued by

Ministry of Industry and Information Technology of the People’s Republic of China

Level / Type

National · Recommended

Issue date

April 30, 2015

Implementation date

October 1, 2015

Scope

WB/T 1120-2022 (Service specification for used traction battery recycling) is available as an English-translated PDF.

WB/T 1120-2022 — This Standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation, storage and quality certificates for monazite concentrate.

This Standard applies to dry monazite concentrate obtained from placer beneficiation and enrichment, which is used for the extraction of rare earth metals and their compounds and the extraction of thorium.

Found what you need?

Document preview — WB/T 1120-2022

National Standard of the People's Republic of China

ICS
77.120.99
Classification
H 65

Issued by: Ministry of Industry and Information Technology of the People’s Republic of China

Contents

  • Foreword...3
  • 1 Scope...4
  • 2 Normative References...4
  • 3 Requirements...4
  • 4 Test Methods...5
  • 5 Inspection Rules...6
  • 6 Marking, Packaging, Transportation, Storage and Quality Certificate...7

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009.

This Standard replaced XB/T 104-2010 Monazite Concentrate.

The major technical changes between this Standard and XB/T 104-2010 are as follows.

--- Modify the normative references; delete YB/T 5142, and add GBZ 139, GB 5750.13, GB

11806, and GB 18871;

--- Add character-designation of the product;

--- Add content range of product U3O8;

--- Add content range of product P2O5;

--- Add control range of the total radioactive activity index of the product;

--- Add detection method for the total radioactive activity of the product;

--- Add raw material traceability identification (the specific name of the production mine

must be indicated);

--- Add product transportation requirements;

--- Add storage requirements.

This Standard was proposed by and shall be under the jurisdiction of National Technical

Committee on Rare Earth of Standardization Administration of China (SAC/TC 229).

Chief drafting organizations of this Standard. Hunan Rare Earth Metal Materials Research

Institute; Yiyang Hongyuan Rare Earth Co., Ltd.; and Ganzhou Qiangdong Rare Earth Group

Co., Ltd.

Chief drafting staffs of this Standard. Liu Lirong, Wang Zhijian, Liu Yuhui, Yi Shi, Zou Long,

Chen Yuhua, Yao Nanhong, and Xu Geming.

The historical editions replaced by this Standard are as follows.

--- XB/T 104-1995, XB/T 104-2000, XB/T 104-2010.

Monazite Concentrate

1 Scope

This Standard specifies the requirements, test methods, inspection rules and marking,

packaging, transportation, storage and quality certificates for monazite concentrate.

This Standard applies to dry monazite concentrate obtained from placer beneficiation and

enrichment, which is used for the extraction of rare earth metals and their compounds and the

extraction of thorium.

2 Normative References

The following documents are essential to the application of this Document. For the dated

documents, only the versions with the dates indicated are applicable to this Document; for the

undated documents, only the latest version (including all the amendments) is applicable to this

Document.

GBZ 139 Radiological protection standards for the production places of rare-earth

elements

GB 5750.13 Standard examination methods for drinking water - Radiological parameters

GB 11806 Regulations for the safe transport of radioactive material

GB 18871 Basic Standards for Protection against Ionizing Radiation and for the Safety of

Radiation Sources

3 Requirements

3.1 Chemical composition

The chemical composition of the product shall comply with the provisions in Table 1.If the

purchaser has special requirements, the supplier and purchaser can negotiate separately.

3.3 Appearance

4 Test Methods

4.1 Chemical composition

4.2 Total radioactivity

The detection method of the total radioactive activity of the product shall be carried out in

accordance with GB/T 5750.13.

4.3 Appearance quality

Product appearance quality is visually inspected.

5 Inspection Rules

5.1 Inspection and acceptance

5.2 Batching

Products of the same designation shall be submitted for inspection in batches.

5.3 Inspection items

Each batch of products shall be inspected for chemical composition and appearance quality.

5.4 Sampling and sample preparation

The arbitration sampling quantity shall be as specified in Table 2.Each batch of products is

sampled by the intubation method (inner diameter 10mm, 1/3 slotted tube); and the sample size

of each bag is no less than 100g. After the sample is thoroughly mixed, it is quickly divided

into the required amount of the sample using the quartering method; put it into the sample bag

and seal it.

5.5 Judgment of inspection results

5.5.1 If the arbitration analysis results of any of the chemical composition and total radioactivity

do not comply with the provisions of this Standard, double quantity of the samples will be taken

from the batch of products to conduct re-inspection of the unqualified items. If the unqualified

items are still unqualified, then the batch of products is judged to be unqualified.

6 Marking, Packaging, Transportation, Storage and Quality Certificate

6.1 Marking and packaging

6.1.1 There shall be a color-fast and obvious mark on the outside of the packaging barrel (pack)

stating.

6.1.2 The inner packaging of the product is in a plastic bag, which is sealed by hot pressing or

rope-tying. The net weight of each piece is 50kg; the outer packaging is an iron can.

6.2 Transportation and Storage

The product must be protected from rain during transportation and must be stored in a dry place.

It must not be placed in the open air.

6.3 Quality certificate

Each batch of products shall be accompanied by a quality certificate, stating.

XB/T 104-2015

XB

RARE EARTH INDUSTRY STANDARD

ICS 77.120.99

H 65

Replacing XB/T 104-2010

Monazite Concentrate

Issued on. APRIL 30, 2015

Implemented on. OCTOBER 1, 2015

Issued by. Ministry of Industry and Information Technology of the People's

Republic of China

Table of Contents

Foreword... 3

1 Scope... 4

2 Normative References... 4

3 Requirements... 4

4 Test Methods... 5

5 Inspection Rules... 6

6 Marking, Packaging, Transportation, Storage and Quality Certificate... 7

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009.

This Standard replaced XB/T 104-2010 Monazite Concentrate.

The major technical changes between this Standard and XB/T 104-2010 are as follows.

--- Modify the normative references; delete YB/T 5142, and add GBZ 139, GB 5750.13, GB

11806, and GB 18871;

--- Add character-designation of the product;

--- Add content range of product U3O8;

--- Add content range of product P2O5;

--- Add control range of the total radioactive activity index of the product;

--- Add detection method for the total radioactive activity of the product;

--- Add raw material traceability identification (the specific name of the production mine

must be indicated);

--- Add product transportation requirements;

--- Add storage requirements.

This Standard was proposed by and shall be under the jurisdiction of National Technical

Committee on Rare Earth of Standardization Administration of China (SAC/TC 229).

Chief drafting organizations of this Standard. Hunan Rare Earth Metal Materials Research

Institute; Yiyang Hongyuan Rare Earth Co., Ltd.; and Ganzhou Qiangdong Rare Earth Group

Co., Ltd.

Chief drafting staffs of this Standard. Liu Lirong, Wang Zhijian, Liu Yuhui, Yi Shi, Zou Long,

Chen Yuhua, Yao Nanhong, and Xu Geming.

The historical editions replaced by this Standard are as follows.

--- XB/T 104-1995, XB/T 104-2000, XB/T 104-2010.

Monazite Concentrate

1 Scope

This Standard specifies the requirements, test methods, inspection rules and marking,

packaging, transportation, storage and quality certificates for monazite concentrate.

This Standard applies to dry monazite concentrate obtained from placer beneficiation and

enrichment, which is used for the extraction of rare earth metals and their compounds and the

extraction of thorium.

2 Normative References

The following documents are essential to the application of this Document. For the dated

documents, only the versions with the dates indicated are applicable to this Document; for the

undated documents, only the latest version (including all the amendments) is applicable to this

Document.

GBZ 139 Radiological protection standards for the production places of rare-earth

elements

GB 5750.13 Standard examination methods for drinking water - Radiological parameters

GB 11806 Regulations for the safe transport of radioactive material

GB 18871 Basic Standards for Protection against Ionizing Radiation and for the Safety of

Radiation Sources

3 Requirements

3.1 Chemical composition

The chemical composition of the product shall comply with the provisions in Table 1.If the

purchaser has special requirements, the supplier and purchaser can negotiate separately.

3.3 Appearance

4 Test Methods

4.1 Chemical composition

4.2 Total radioactivity

The detection method of the total radioactive activity of the product shall be carried out in

accordance with GB/T 5750.13.

4.3 Appearance quality

Product appearance quality is visually inspected.

5 Inspection Rules

5.1 Inspection and acceptance

5.2 Batching

Products of the same designation shall be submitted for inspection in batches.

5.3 Inspection items

Each batch of products shall be inspected for chemical composition and appearance quality.

5.4 Sampling and sample preparation

The arbitration sampling quantity shall be as specified in Table 2.Each batch of products is

sampled by the intubation method (inner diameter 10mm, 1/3 slotted tube); and the sample size

of each bag is no less than 100g. After the sample is thoroughly mixed, it is quickly divided

into the required amount of the sample using the quartering method; put it into the sample bag

and seal it.

5.5 Judgment of inspection results

5.5.1 If the arbitration analysis results of any of the chemical composition and total radioactivity

do not comply with the provisions of this Standard, double quantity of the samples will be taken

from the batch of products to conduct re-inspection of the unqualified items. If the unqualified

items are still unqualified, then the batch of products is judged to be unqualified.

6 Marking, Packaging, Transportation, Storage and Quality Certificate

6.1 Marking and packaging

6.1.1 There shall be a color-fast and obvious mark on the outside of the packaging barrel (pack)

stating.

6.1.2 The inner packaging of the product is in a plastic bag, which is sealed by hot pressing or

rope-tying. The net weight of each piece is 50kg; the outer packaging is an iron can.

6.2 Transportation and Storage

The product must be protected from rain during transportation and must be stored in a dry place.

It must not be placed in the open air.

6.3 Quality certificate

Each batch of products shall be accompanied by a quality certificate, stating.

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

Referenced standards

How to Download WB/T 1120-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
7 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

WB/T 1120-2022

$80.00