TB/T 3332-2013Railway applications - Method for determining the equivalent wheel/rail conicity (English PDF)
铁路应用 确定轮轨等效锥度的方法
This is a limited preview
Buy now to download the full PDF (39 pages)
Need quotation for your management?
Get a formal quotation for TB/T 3332-2013 in 30 minutes.
Issued by
Ministry of Railways of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
TB/T 3332-2013 is the English-translated version of 铁路应用 确定轮轨等效锥度的方法.
TB/T 3332-2013 is the Chinese standard "Railway applications - Method for determining the equivalent wheel/rail conicity". This standard specifies a method for evaluation.
In addition to the standard algorithm given algorithm can be applied to other equivalent taper. In order to get an accurate equivalent conicity calculations, the standard gives a basis of calculation. It was issued by Ministry of Railways of the People's Republic of China.
Found what you need?
Document preview — TB/T 3332-2013
National Standard of the People's Republic of China
- ICS
- 45.020
- Classification
- S30
Issued by: Ministry of Railways of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 3.1 Basic requirements
- 3.2 Material requirements
- 3.3 Structural requirements
- 3.4 Performance Requirements
- 4 Technical Requirements
- 4.1 Longitudinal rail restraint
- 4.2 Assembly clamping force
- 4.3 Fatigue performance of fastening assembly
- 4.4 Insulation performance
- 5 Test Methods
- 5.1 Type Inspection
- 5.2 End-of-manufacturing Inspection
- 6 Inspection Rules
- 6.1 Vertical Load Test
- 6.2 Longitudinal Compression Test
- 6.3 Longitudinal Tension Load Test
- 6.4 Torque Load Test
- 6.5 Rescue Strength Test (Single-head Lifting)
- 6.6 Safe Pressure Test of the Driver's Cab
- 6.7 Anti-collision Structure Pressure Test of the Driver's Cab
- 6.8 Cowcatcher Pressure Test
- 7 Marking, Packaging, Transportation and Storage
- 8 Test Equipment and Instruments
- 9 Strain Gage and Its Pasting and Wiring
- 9.1 Requirements of Measuring Gage
- 9.2 Requirements of Temperature Compensating Gage
- 9.3 Pasting Requirements of Strain Gage
- 9.4 Wiring Requirements of Strain Gage
- 9.5 Moisture-proof of Strain Gage
1 Foreword
TB/T 3332-2013 is issued by Ministry of Railways of the People's Republic of China.
The TB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 39 pages in English translation.
2 Scope Preview
This standard specifies a method for evaluation. In addition to the standard algorithm given algorithm can be applied to other equivalent taper. In order to get an accurate equivalent conicity calculations, the standard gives a basis of calculation.
TB/T 3332-2013 falls under ICS 45.020, in the field of railway engineering.
This catalogue holds 457 other TB/T standards in that field.
In this catalogue, TB/T standards carry edition years from 1973 to 2026.
3 About this standard
Sector: Railway & Train Industry Standard (Recommended)
Issued by: Ministry of Railways of the People's Republic of China
English translation: about 39 pages (approximate)
Chinese original: about 58,573 characters
4 Related standards
Standards on related subjects:
GB/T 37423-2019 — Urban rail transit inverter for regenerative braking energy absorption
GB/T 5599-2019 — Specification for dynamic performance assessment and testing verification of rolling stock
TB/T 3237-2010 — Flame retardant technical specification of decorating materials for multiple unit train
TB/T 3503.5-2023 — Aerodynamics for railway applications - Part 5: High wind assessment requirements and test methods
TB/T 3426-2023 — Rolling stock axle box rolling axle box
TB/T 3342-2014 — Definition of locomotive and rolling stock reference weights
5 Classification and status
International classification (ICS): 45.020
Chinese Standard Classification (CCS): S 30
Prefix TB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 39 pages — is available in the English PDF.
How to Download TB/T 3332-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
TB/T 2033-2026 — Rail vehicle - Rail flat car
TB/T 2075.24-2026 — Parts and components for overhead contact system in electrified railway - Part 24: Preformed fittings
TB/T 2809-2026 — Electrified railway catenary - Copper alloy catenary
TB/T 3332-2013
$710.00