TB/T 3119-2005Technical specifications for using and repairing of used rails (English PDF)
铁道旧轨使用和整修技术条件
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for TB/T 3119-2005 in 30 minutes.
Issued by
National Railway Administration
Level / Type
National · Recommended
Issue date
June 27, 2005
Implementation date
June 27, 2005
Scope
TB/T 3119-2005 is the English-translated version of 铁道旧轨使用和整修技术条件.
TB/T 3119-2005 is the Chinese standard "Technical specifications for using and repairing of used rails". This standard specifies the railroad 50kg/m and 60kg/m rail classification of old, refurbished rail technical requirements and acceptance criteria, and then track the use of technical requirements.
This standard applies to railroad 50kg/m and 60kg/m rail use and refurbishment of old. Issued on 2005-06-27, in force from 2005-06-27.
Found what you need?
Document preview — TB/T 3119-2005
National Standard of the People's Republic of China
- ICS
- 45.080
- Classification
- S11
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 3.1 Basic requirements
- 3.2 Material requirements
- 3.3 Structural requirements
- 3.4 Performance Requirements
- 4 Technical Requirements
- 4.1 Longitudinal rail restraint
- 4.2 Assembly clamping force
- 4.3 Fatigue performance of fastening assembly
- 4.4 Insulation performance
- 5 Test Methods
- 5.1 Type Inspection
- 5.2 End-of-manufacturing Inspection
- 6 Inspection Rules
- 6.1 Vertical Load Test
- 6.2 Longitudinal Compression Test
- 6.3 Longitudinal Tension Load Test
- 6.4 Torque Load Test
- 6.5 Rescue Strength Test (Single-head Lifting)
- 6.6 Safe Pressure Test of the Driver's Cab
- 6.7 Anti-collision Structure Pressure Test of the Driver's Cab
- 6.8 Cowcatcher Pressure Test
- 7 Marking, Packaging, Transportation and Storage
- 8 Test Equipment and Instruments
- 9 Strain Gage and Its Pasting and Wiring
- 9.1 Requirements of Measuring Gage
- 9.2 Requirements of Temperature Compensating Gage
- 9.3 Pasting Requirements of Strain Gage
- 9.4 Wiring Requirements of Strain Gage
- 9.5 Moisture-proof of Strain Gage
1 Foreword
TB/T 3119-2005 was issued by National Railway Administration on 27 June 2005 and took effect the same day.
The TB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 8 pages in English translation.
2 Scope Preview
This standard specifies the railroad 50kg/m and 60kg/m rail classification of old, refurbished rail technical requirements and acceptance criteria, and then track the use of technical requirements. This standard applies to railroad 50kg/m and 60kg/m rail use and refurbishment of old.
TB/T 3119-2005 falls under ICS 45.080, in the field of railway engineering.
This catalogue holds 457 other TB/T standards in that field.
In this catalogue, TB/T standards carry edition years from 1973 to 2026.
3 About this standard
Sector: Railway & Train Industry Standard (Recommended)
Issued by: National Railway Administration
English translation: about 8 pages (approximate)
Chinese original: about 7,725 characters
4 Related standards
Standards on related subjects:
TB/T 3395.1-2015 — Fastening systems for high-speed railway - Part 1: General requirement
TB/T 3080-2014 — Concrete turnout sleeper for ballasted track
TB/T 3276-2011 — [Including 2017XG1] Rails for high speed railway
TB/T 3355-2023 — Track detection Dynamic detection of track geometric state
TB/T 2629-2023 — Railway Ballasted Track Concrete Elastic Sleeper
TB/T 1780-2023 — Railway gauge rod
5 Classification and status
International classification (ICS): 45.080
Chinese Standard Classification (CCS): S 11
Prefix TB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download TB/T 3119-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
TB/T 2033-2026 — Rail vehicle - Rail flat car
TB/T 2075.24-2026 — Parts and components for overhead contact system in electrified railway - Part 24: Preformed fittings
TB/T 2809-2026 — Electrified railway catenary - Copper alloy catenary
TB/T 3119-2005
$90.00