Valid

T/CSAE 83-2018The emergency exit setting requirements for electric bus (English PDF)

电动客车应急出口设置规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for T/CSAE 83-2018 in 30 minutes.

Issued by

China Society of Automotive Engineers

Level / Type

National · Mandatory

Issue date

July 24, 2018

Implementation date

January 1, 1970

Scope

T/CSAE 83-2018 is the English-translated version of 电动客车应急出口设置规范.

T/CSAE 83-2018 — This standard specifies the quantity, size, location and logo of the emergency exit of electric buses. This standard applies to electric buses with a length of 6m or more, including pure electric buses/city buses, hybrid buses/city City bus (including plug-in and extended program), fuel cell bus/city bus reference.

Found what you need?

Document preview — T/CSAE 83-2018

National Standard of the People's Republic of China

Classification
T 47

Issued by: China Society of Automotive Engineers

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms
  • 4 Setup requirements
  • 4.1 Number of emergency exits
  • 4.2 Emergency exit settings

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

Some elements of this standard may involve patents, and the standard issuing authority does not assume responsibility for identifying these patents.

This standard was proposed by the Technical Innovation Alliance of the Electric Vehicle Industry.

This specification was drafted. Shanghai Fire Research Institute of the Ministry of Public Security, Shanghai International Automobile City (Group) Co., Ltd., SAIC Wanxiang New Energy Bus Co., Ltd.

1 Scope

This standard specifies the quantity, size, location and logo of the emergency exit of electric buses.

This standard applies to electric buses with a length of 6m or more, including pure electric buses/city buses, hybrid buses/city City bus (including plug-in and extended program), fuel cell bus/city bus reference.

2 Normative references

The following documents are indispensable for the application of this document and the latest editions (including all amendments) apply to this specification.

GB/T 13094 passenger car structural safety requirements GB/T 19596 electric vehicle terminology GB 7258 Motorcycle Operation Safety Technical Conditions CJ/T 350 electric bus general technical conditions JT/T 1096 electric bus configuration requirements

3 Terms

GB 13094, GB/T 19596, CJ/T 350, JT/T 1096 established and the following terms and definitions apply to this document.

4 Setup requirements

4.1 Number of emergency exits

4.1.1 The number of vehicle emergency exits should be considered together with the number of passenger doors.

4.1.2 In order to meet the evacuation and out-of-vehicle assistance in emergency situations, the exit of each compartment (excluding the bathroom or cooking room) the minimum number (including passenger door and emergency exit) shall comply with the requirements of Table 1.

Table 1 Minimum number of exports

Number of passengers and crews (number) Minimum number of exits (units) 9 to 16 3 17 to 30 5 31 to 45 7 46 to 60 8 2T/CSAE 83 -.2018 Number of passengers and crews (number) Minimum number of exits (units) 61 to 75 9 76 to 90 10 91 to 110 11 111 to 130 12 > 130 13 Note. Regardless of the number of evacuation hatches, it can only be counted as one emergency exit.

4.1.3 Passenger cars with a length of more than 7m should be provided with evacuation hatches (double-decker buses should be located on the upper roof). Class A and Class I buses should at least one evacuation hatch shall be provided, and the minimum number of evacuation hatches for Class B, Class II and Class III passengers shall be in accordance with Table 2.

Table 2 Minimum number of evacuation hatches for Class II and Class III passenger cars

Number of occupants (number) Number of evacuation hatches (a) <= 50 1 > 50 2 Note. The double-decker bus refers to the upper layer.

4.1.4 In an emergency, all occupants of the lower deck of the double-deck passenger car should have a route that is evacuated outside the vehicle without the upper deck.

4.2 Emergency exit settings

4.2.1 For passenger cars with a length of 6m or more, there is only one passenger door on the right side of the vehicle body and no driver's door is provided on the left side of the vehicle body.

Emergency doors should be placed on the left or rear of the car body. Passenger cars with a length of more than 7m should be provided with evacuation hatches.

4.2.2 The number of exits on the left and right sides of the passenger car should be basically the same, and the exit on the same side should be reasonably distributed along the length of the bus.

4.2.3 After the evacuation hatch is opened, the rechargeable energy storage system (or installation cabin) and the passenger cabin should remain intact.

The insulation part should be made of fireproof and heat insulation material, and the edge of the battery pack should be greater than or equal to 500mm.

4.2.4 Emergency door

4.2.4.1 The net height of the emergency door should be greater than or equal to 1250mm, and the net width should be greater than or equal to 550mm; however, the length of the vehicle is less than or equal to 7m.

For passenger cars, the net height of the emergency door should be greater than or equal to 1100mm. If the wheel cover protrudes within 400mm from the lowest point of the door hole, then the wheel cover the net width of the emergency door at the bulge can be reduced to 300mm.

4.2.4.2 The hinged emergency door on the side of the vehicle shall be hinged at the front end, and the outward opening angle shall be greater than or equal to 100° and shall be Keep it open at an angle. If the free passage of 550mm or more can be provided when the emergency door is opened, the opening degree is greater than or equal to 100°.

The request may not be satisfied.

4.2.4.3 The emergency door shall have a locking mechanism and be securely locked. The emergency door should be able to lock when it is closed, and under normal driving conditions it will not open itself due to vibration, bumps and collisions of the vehicle. Emergency doors should be effective to prevent misuse.

4.2.4.4 When the vehicle is stopped, the emergency door should be easy to open from inside and outside without tools. The emergency door should be separated from the driver.

Control opening and passenger manual opening two in-car opening modes, and having a door opening sound alarm device, when the emergency door is not completely closed Remind the driver. It is allowed to lock the door from the outside of the car, but it should be ensured that it can always be opened from the inside with the normal opening device;

Continued

3T/CSAE 83 -.2018

Set a protective cover or other protective device that can be manually removed, and the height from the ground (when empty) should be less than or equal to 1800mm.

4.2.5 Emergency window and evacuation hatch

4.2.5.1 The area of the emergency window and evacuation hatch should be greater than or equal to (4 × 105) mm2, and can be connected to a 500mm × 700mm (Rectangle for a bus with a length of 7m or less of 450mm × 700mm); if the emergency window is located at the rear end of the bus, it can be connected internally.

A rectangle of 350 mm × 1550 mm and a radius of curvature of 250 mm or less is also considered to be satisfactory.

4.2.5.2 Hinged or catapult emergency windows shall be opened outwards. Horizontal hinges on the upper end of the emergency window should have an appropriate mechanism Keep it fully open. The type of ejection should not be completely separated from the vehicle during operation. The catapult emergency window should effectively prevent misoperation.

4.2.5.3 For the hinged emergency window that the driver cannot clearly see from his seat, an audible alarm device shall be installed.

The response is initiated by the movement of the window lock (not the window itself), alerting the driver when the emergency window is not fully closed.

4.2.5.4 The emergency window shall be equipped with a device that is easily and quickly opened from inside and outside the vehicle; or an automatic window breaking device; or easy to crush Safety glass (instead of laminated glass or plastic) and marked on the glass where it is easy to break, in the vicinity of each emergency window an emergency hammer is provided to facilitate the crushing of the window glass, and the alarm should be realized by an audible signal when the emergency hammer is removed. Passenger standing area the windows on both sides of the bus body, if the hole can be connected to a rectangle with an area greater than or equal to 800mm × 900mm, it should be set to push Pull-type or push-out emergency window; if the hole can be connected with a rectangle with an area greater than or equal to 500mm × 700mm, it should be set to crush Glass-type emergency window with emergency hammer or automatic window breaking function nearby.

4.2.5.5 The evacuation hatch should be easily opened or removed from inside and outside the vehicle. After the evacuation hatch is opened, the access from inside and outside the vehicle should be ensured.

It is permissible to lock the evacuation hatch, but it must be ensured that it can always be opened or removed from the vehicle with a normal opening or removal mechanism. Easy to hit Broken safety roof windows should provide a convenient tool for crushing the safety roof window in the vicinity.

4.2.5.6 The ejection type of the evacuation hatch does not allow the entire separation from the vehicle during operation and does not pose a hazard to persons outside the vehicle.

Ejection evacuation hatches should be effective to prevent misuse. The catapult floor exit should only be bounced into the passenger compartment. Articulated evacuation hatches should be hinged at the end facing the front or rear of the vehicle, it should be turned on at least 100°. The articulated floor exit should be folded into the passenger compartment.

4.2.5.7 The floor exit shall be articulated or catapulted and equipped with an audible alarm to alert the driver when it is not fully closed.

The warning device should be activated by the movement of the locking device of the floor outlet (instead of the floor outlet itself). Floor exit should be effectively prevented the operation of the door is not applicable to the floor outlet that can be automatically locked when the vehicle speed exceeds 5km/h.

4.2.6 Mark

Each emergency exit should be marked with the word "emergency exit" near it, and the font height should be greater than or equal to 40mm. Passenger door and shelter Emergency controllers with emergency exits (including tools for crushing the window of the emergency window) should be marked with symbols or clear words near them Show, and indicate the method of operation, the font height should be greater than or equal to 10mm.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

Referenced standards

How to Download T/CSAE 83-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
7 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

T/CSAE 83-2018

$209.00