SN/T 3807-2014Determination of purity of Phthalic anhydride - Differential scanning calorimetry(DSC) (English PDF)
邻苯二甲酸酐纯度的测定 差示扫描量热法
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3807-2014 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
January 13, 2014
Implementation date
August 1, 2014
Scope
SN/T 3807-2014 is the English-translated version of 邻苯二甲酸酐纯度的测定 差示扫描量热法.
SN/T 3807-2014 - This standard specifies the phthalic anhydride purity of differential scanning calorimetry. This standard applies to phthalic anhydride (purity greater than 98.5%) of purity determination.
Found what you need?
Document preview — SN/T 3807-2014
National Standard of the People's Republic of China
- ICS
- 71.080.50
- Classification
- G17
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Materials and equipment
- 5 Calibration
- 6 Step, Analysis
Foreword
This standard was drafted in accordance with the rules of GB/T 1.1-2009 given.
This standard technical reference adopted ASTME928-2008 "Standard Test Method for differential scanning calorimetry determination of purity," A Method of this standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Guangdong CIQ, People's Republic of China Shandong Entry-Exit Inspection and Quarantine Bureau.
1 Scope
This standard specifies the phthalic anhydride purity of differential scanning calorimetry.
This standard applies to phthalic anhydride (purity greater than 98.5%) of purity determination.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 19466.1-2004 plastic differential scanning calorimetry (DSC) - Part 1. General (ISO 11357-1:1997, IDT) Standard Test Method for Measurement ASTME793 melting and crystallization enthalpy by differential scanning calorimetry (StandardTestMethod forEnthalpiesofFusionandCrystalizationbyDifferentialScanningCalorimetry)
3 Method summary
With a differential scanning calorimeter measurement of phthalic anhydride under a nitrogen atmosphere enthalpy with temperature changes, enthalpy - temperature curve plot Points obtained during the phase transition enthalpy of the phase transition in a temperature enthalpy programmatic processing of the sample to calculate the content of impurities, to give phthalic anhydride purity.
4 Materials and equipment
4.1 n-hexane, chromatography.
4.2 Indium. purity of not less than 99.99%.
4.3 Nitrogen. purity of not less than 99.99%.
4.4 differential scanning calorimeter. in line with GB/T 19466.1-2004 specified in 5.1 a differential scanning calorimeter. Differential calorimeter must Maintaining the standard room temperature in laboratory operations. Ventilation should avoid direct sunlight and sudden temperature changes.
4.5 balance. weighing accuracy of ± 0.00001g.
4.6 Sample dish. in line with GB/T 19466.1-2004 provisions of 5.2.
5 Calibration
As recommended by the instrument manufacturer's calibration calorimeter. Recommended test substance analytically pure indium temperature range accuracy.
6 Step, Analysis
6.1 Before the test pans required cleaning solvent such as hexane, until the solvent is completely evaporated, at 400 °C in a high temperature furnace heating 1min, cooling, Into the dryer within the reserve.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 11357
How to Download SN/T 3807-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19466.1-2004 — Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 5778-2026 — Rules for the inspection of common imported and exported rare earth products
SN/T 3807-2014
$169.00