SN/T 3738-2013Standard for movable infectious diseases quarantine isolation facility at frontier ports (English PDF)
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3738-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
November 6, 2013
Implementation date
June 1, 2014
Scope
SN/T 3738-2013 (Standard for movable infectious diseases quarantine isolation facility at frontier ports) is available as an English-translated PDF.
SN/T 3738-2013 - This standard specifies the technical requirements for border crossings can be kept for mobile infectious disease isolation facility construction.
This standard applies to border crossings removable infectious disease quarantine inspection for facility construction.
Found what you need?
Document preview — SN/T 3738-2013
National Standard of the People's Republic of China
- ICS
- 11.020
- Classification
- C62
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Basic requirements
- 4.1 Body-building requirements
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China, Shenzhen CIQ, Shenzhen Inspection and Quarantine Science Research Institute.
1 Scope
This standard specifies the technical requirements for border crossings can be kept for mobile infectious disease isolation facility construction.
This standard applies to border crossings removable infectious disease quarantine inspection for facility construction.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 18466 medical institutions sewage discharge requirements Construction Quality GB 50242 Building Water and Heating Engineering acceptance GB 50243 Construction Quality Acceptance of Ventilation and Air Conditioning Engineering Building Construction Quality GB 50303 Electrical Projects GB 50591 clean room construction and acceptance GB 50686 infectious diseases hospital construction and acceptance Medical Waste Management Regulations (State Council Decree)
3 Terms and Definitions
The following terms and definitions apply to this document.
Movable kept for infectious disease isolation facilities movableinfectiousdiseasesquarantineisolationfacility A "45-foot high cabinet" that 1EE Container remodeled, with easy handling overall, with the isolation of epidemic suspect Liu Yan, etc.
Facilities required measures.
4 Basic requirements
4.1 Body-building requirements
4.1.1 Movable Infectious Diseases Isolation facilities should be set aside for inspection for hydropower split within the interface, sewerage port facilities should be designed to snap the movable items Means to prevent the dumping occurred during the transport movement.
4.1.2 removable for inspection for infectious diseases isolation facilities construction material should be used for internal quality documents and inspection reports, and should be valid Within; materials used shall comply with the relevant materials harmful substances existing national standards.
4.1.3 removable for inspection for infectious diseases isolation facilities should be used to the sewer pipe and tubing compatible. Water pipes should be pressure test. Drains should pass the ball test. Strength test and tightness test should be done before the valve is installed. Test methods should be consistent with design Seek, when no design requirements, according to relevant provisions of GB 50242 implementation.
4.1.4 Movable infectious diseases isolation facility inspection for ventilation and air conditioning duct system should be carried out relevant provisions of GB 50591 Tightness test
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 18466Discharge standard of water pollutants for medical organization
- GB 50242Code for acceptance of construction quality of water supply drainage and heating works
- GB 50243Code of Acceptance for Construction Quality of Ventilation and Air
- GB 50591Code for construction and acceptance of cleanroom
- GB 50686Code for construction and acceptance of infectious diseases hospitals
GB 50303
How to Download SN/T 3738-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 18466-2005 — Discharge standard of water pollutants for medical organization
GB 50242-2002 — Code for acceptance of construction quality of water supply drainage and heating works
GB 50243-2016 — Code of Acceptance for Construction Quality of Ventilation and Air
Secure payment via Stripe
Payments accepted
SN/T 3738-2013
$105.00