SN/T 3713-2013Screening of chromium pigment in paints-Inductively coupled plasma atomic emission spectrometry (English PDF)
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3713-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
November 6, 2013
Implementation date
June 1, 2014
Scope
SN/T 3713-2013 (Screening of chromium pigment in paints-Inductively coupled plasma atomic emission spectrometry) is available as an English-translated PDF.
SN/T 3713-2013 - This standard specifies the inductively coupled plasma atomic emission spectrometry method for screening the chromium coating pigments. This standard applies to screening paint chrome yellow, lead chromate, molybdenum, chromium and red pigments. This standard does not apply to chrome green paint.
Found what you need?
Document preview — SN/T 3713-2013
National Standard of the People's Republic of China
- ICS
- 87.010
- Classification
- G50
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method Summary
- 4 Reagents and materials
- 5 Instruments
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Zhejiang Exit Inspection and Quarantine drafted.
1 Scope
This standard specifies the inductively coupled plasma atomic emission spectrometry method for screening the chromium coating pigments.
This standard applies to screening paint chrome yellow, lead chromate, molybdenum, chromium and red pigments.
This standard does not apply to chrome green paint.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Preparation of standard solution of GB/T 602 Determination of impurities in chemical reagents Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 8170 repair value expressed about the rules and limit values and judgment GB/T 23942 Chemicals inductively coupled plasma atomic emission spectrometry General
3 Method Summary
After the paint were coated and dried by microwave digestion method to remove all organic material, after constant volume by inductively coupled plasma atomic emission Spectrometry, chromium content is calculated according to the curve.
4 Reagents and materials
Unless otherwise indicated, the reagents used were of analytical grade standard, distilled or deionized water should be consistent with GB/T 6682 two water requirements.
4.1 nitric acid (rho = 1.42g/mL).
4.2 Hydrogen peroxide (rho = 1.10g/mL).
4.3 Chromium standard solution. the concentration of chromium 1000µg/mL standard solution prepared according to GB/T 602 method, or direct use of Chromium standard solution reference material certificate within the validity period.
5 Instruments
5.1 Inductively coupled plasma atomic emission spectrometer, the reciprocal linear dispersion rate stability (short-range, long-range), and the background equivalent concentration detection limit, the calibration curve shall comply with GB/T 23942 of. Instrument conditions, see informative Annex A.
5.2 microwave digestion. Microwave digestion temperature control routine samples see informative Annex B.
5.3 Balance. a sense of the amount of 0.1mg.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 602Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
- GB/T 23942Chemical reagent - General rules for inductively coupled plasma atomic emission spectrometry
How to Download SN/T 3713-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23942-2009 — Chemical reagent - General rules for inductively coupled plasma atomic emission spectrometry
GB/T 602-2026 — Chemical reagent - Preparation of standard solutions for impurity determination
GB/T 6020-2008 — Butadiene for industrial use -- Determination of tert-butyl-catechol (TBC)
Secure payment via Stripe
Payments accepted
SN/T 3713-2013
$85.00