SN/T 3701.13-2015Technical requirements for the inspection of used mechanical and electrical products for import - Part 13: Cutting machine tools for non-metal (English PDF)

Foreword

SN/T 3701 "imported old mechanical and electrical product testing technical requirements" is divided into 13 parts.

--- Part 1. continuous freight elevators and conveyors;

--- Part 2. Leather and leather treatment, processing, production machines;

--- Part 3. electroplating, electrolysis or electrophoresis machines and apparatus;

--- Part 4. Non-metal or cermet cutting machine tools;

--- Part 5. stone, ceramics, concrete, asbestos cement or similar mineral material processing machine;

--- Part 6. earthwork loading machinery;

--- Part 7. agriculture, horticulture and forestry machinery;

--- Part 8. glass production and glass processing machines;

--- Part 9. harvesters, threshers;

--- Part 10. forklifts;

--- Part 11. Injection molding machine;

--- Part 12. hydraulic excavators;

--- Part 13. Non-metallic machining cutting tools.

This section SN/T 3701 Part 13.

This section drafted in accordance with GB/T 1.1-2009 given rules.

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

This section is responsible for drafting the People's Republic of China Jiangsu CIQ.

1 Scope

SN/T 3701 provisions of this part of the import of non-metallic machining cutting the old machine (hereinafter referred to as the old machine tool product) inspection technical requirements.

This section applies to imports of non-metal cutting machining machine tools in the old pre-shipment inspection, receiving inspection, two aspects of the test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 2893-2008 Safety colors GB 2894-2008 Guidelines for the use and safety signs Flag basic safety rules and equipment terminals and conductor terminal GB/T 4026-2010 man-machine interface, marking and identification GB 5083-1999 General production equipment with safety and health GB 5226.1-2008 Safety of machinery electrical equipment Part 1. General requirements GB 18209.3-2010 Electrical safety of machinery - Indication, marking and actuation - Part 3. actuator location and operating requirements GB Z2.1-2007 workplace harmful factors of occupation exposure limits - Part 1. Chemical hazardous agents SN/T 3247-2012 the import of used machinery and product testing technology General requirements

3 Terms and Definitions

GB 5083, GB 5226.1 and SN/T 3247 defined by the following terms and definitions apply to this document.

Non-metal cutting machine tools cuttingmachinetoolsfornon-metal machining Machining including but not limited to wood, cement, mineral rock, artificial graphite, asbestos, special ceramics, synthetic rubber, synthetic resin (plastic Material) and other non-metallic element or a compound material of the machine.

4 Technical Requirements