SN/T 3701.11-2015Technical requirements for the inspection of used electrical mechanical products for import--Part 11: Injection moulding machines for rubber and plastics (English PDF)

Foreword

SN/T 3701 "Inspection Technical Requirements for Imported Used Electromechanical Products" is divided into 12 parts.

--- Part 1. Continuous freight lifting, conveyors;

---Part 2. Machines for processing and processing leather and leather;

---Part 3. Electroplating, electrolysis or electrophoresis equipment and devices;

--- Part 4. Non-cutting machine tools for metal or cermets;

--- Part 5. Machine tools for stone, ceramic, concrete, asbestos cement or similar mineral materials;

--- Part 6. Earth-moving machinery;

---Part 7. Agriculture, Horticulture, and Forestry Machinery;

--- Part 8. Glass production and glass processing machines;

---Part 9. Harvesters, threshers;

--- Part 10. Forklifts;

---Part 11. Injection Molding Machines;

--- Part 12. Hydraulic excavators.

This section is Part 11 of SN/T 3701.

This part was drafted in accordance with the rules given in GB/T 1.1-2009 and complies with the requirements of SN/T 2494-2010.

1 Scope

This part of SN/T 3701 specifies the inspection technical requirements for imported injection molding machines.

This section applies to pre-shipment inspection and arrival inspection of imported injection molding machines.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB 5226.1-2008 Electrical equipment for mechanical electrical safety machinery Part 1. General technical conditions GB/T 13306-2011 Signage GB/T 15706-2012 General principles of mechanical safety design risk assessment and risk reduction GB 16297 Integrated emission standards for air pollutants GB/T 16754-2008 Mechanical Safety Emergency Stop Design Principle GB 22530-2008 Rubber Plastic Injection Molding Machine Safety Requirements

3 Terms and Definitions

The definitions of GB 22530-2008 and the following terms and definitions apply to this document.

Injection molding machine injectionmouldingmachines A machine that uses a thermoplastic, a thermosetting plastic, a thermoplastic rubber, or a rubber compound as a raw material to intermittently produce a molded product. increase the molding material is injected through a nozzle into a mold containing a cavity for material formation.

NOTE. See EN 289 if plasticized material is not injected into the mould through a nozzle. An injection molding machine generally includes one or more jigs.

One or more plasticizing and/or injection units, drive and control systems.

4 Technical requirements