Valid

SN/T 3606-2013Determination of water and sediment in middle distillate fuels. Centrifuge method (English PDF)

中间馏分燃料中水和沉淀物含量的测定 离心法

Preview PDF

This is a limited preview

Buy now to download the full PDF (4 pages)

Need quotation for your management?

Get a formal quotation for SN/T 3606-2013 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

August 30, 2013

Implementation date

March 1, 2014

Scope

SN/T 3606-2013 is the English-translated version of 中间馏分燃料中水和沉淀物含量的测定 离心法.

SN/T 3606-2013 - This standard specifies a method for determining centrifugation middle distillate fuel in the water and sediment content. This standard applies to 40 °C viscosity in the range of 1.0mm2/s ~ 4.1mm2/s, a density in the range of 770kg/m3 ~ 900kg/m3 of Determination of water and sediment content of middle distillate fuels.

Found what you need?

Document preview — SN/T 3606-2013

National Standard of the People's Republic of China

ICS
75.160.20
Classification
E31

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Summary
  • 5 Equipment
  • 5.1 Centrifuge

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. People's Republic of China Shanghai Entry-Exit Inspection and Quarantine Bureau.

Drafters of this standard. Shen Bo, Qiu Feng, Zhang Jidong, fees Xudong, Wang Wenqing, Wei Yufeng, Zhao Bo.

Determination of middle distillate fuels in water and sediment content Centrifugation

1 Scope

This standard specifies a method for determining centrifugation middle distillate fuel in the water and sediment content.

This standard applies to 40 °C viscosity in the range of 1.0mm2/s ~ 4.1mm2/s, a density in the range of 770kg/m3 ~ 900kg/m3 of Determination of water and sediment content of middle distillate fuels.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 4756 petroleum liquids hand sampling method (GB/T 4756-1998, ISO 3170. 1988, MOD)

3 Terms and Definitions

The following terms and definitions apply to this document.

Distillate fuels distilatefuel Fuel flash point above 38 °C straight-run distillates, cracked distillates, or a mixture of both.

4 Summary

At 21 °C ~ 32 °C, the 100mL undiluted sample placed in a centrifuge tube and centrifuged at a relative centrifugal force of 10min 800.

After centrifugation, samples of water and sediment deposited on the bottom separated from the centrifuge tube. According to the graduated centrifuge tube in the bottom of the tube readout centrifugation the volume of water and sediment.

5 Equipment

5.1 Centrifuge

Simultaneously using two tubes and two or more, it is possible to provide a relative centrifugal force of 800 ± 60 rpm. He turned around, trunnion ring, bearing and the spacer assembly are well able to withstand the maximum centrifugal force provided by the motor. Trunnion ring and liner during centrifugation of tubes protection.

Centrifugal equipment should be sealed in a metal housing to prevent damage to the device.

The data in Table 1 is used in terms of centrifugal speed and relative centrifugal force size to be achieved. Conversion should be based on the formula (1).

vrpm = 422 Frcfd

Where.

vrpm -- rpm;

Frcf -- relative centrifugal force;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 3606-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
4 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 3606-2013

$115.00