SN/T 3239-2012Rules for the inspection of import and export garment machiinery. General requirements (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

Please note that some of the content of this document may involve patents. Distribution of this document Institutions do not assume the responsibility to identify these patents.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. People's Republic of China Shandong Exit Inspection and Quarantine, Wei Bridge Venture Group.

Introduction

"Mechanical inspection of import and export clothing General requirements" is the import and export of garment machinery inspection work in accordance with the import and export of garment machinery inspection Inspection play a guiding and regulating.

With China's accession to the World Trade Organization (WTO) and the "People's Republic of China Import and Export Commodity Inspection Law" and its implementing regulations amended Import and Export Commodity Inspection mode has undergone great changes, the state inspection and quarantine departments in charge of the establishment of a system of inspection and quarantine standards.

This standard belongs to the inspection and quarantine standards on the third floor --- categories of common standards, provides for import and export of garment machinery inspection General requirements.

Garment Machinery Import and Export inspection of general requirements

1 Scope

This standard specifies the requirements for the import and export of garment machinery, testing and judgment.

This standard applies to the textile industry for the following purposes, all machinery and related equipment.

--- Fiber (staple fiber and filament) yarn and other raw materials or non-woven fabric (including felt) open, clear, mixed, comb, ready carded, Spinning and other processes;

--- Yarn winding and twisting, curling, deformation and crafts and yarn preparation step prior to weaving and knitting;

--- Weaving, knitting, lace weaving and other similar devices forming fabric;

--- Braid, braid ropes rope, twine, nets, and rubbing rope coiling machine except the frame;

Prepare --- fiber, yarn, fabric, braid, rope, etc., bleaching, dyeing, printing and finishing factory and ready;

--- Finished piece dyeing;

--- Warp and weft of finishing, including hosiery, including but not finished suture (ie, sewing);

--- Woven, tufted carpet production processes.

Other criteria for additional specific safety requirements Garment Machinery provisions take precedence over the corresponding requirements of this standard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements GB/T 5465.2 Graphical symbols for electrical equipment - Part 2. Graphical symbols GB/T 17780 Textile machinery - Safety requirements

3 Terms and Definitions

The following terms and definitions apply to this document.

Inspection Lot to carry out the inspection and collection of the same specifications, models, under the same production conditions produce a single batch of product, referred to as batch.

Type Test mode modeoftypetest According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to the scene to examine the provisions of the product batch pumping Sample test, and the quality of enterprise management system conformity assessment activities supervision.

Sampling mode modeofsamplinginspection According to the mandatory requirements of national technical regulations, import and export commodities random inspection lot or batch embodiment qualified sampling, testing and inspection