SN/T 3238.1-2012Rules for the inspection of import and export textile machinery. Part 1: General requirements (English PDF)

Foreword

SN/T 3238 "for the inspection of import and export of textile machinery" is divided into two parts.

--- Part 1. General requirements;

--- Part 2. hosiery.

This section SN/T Section 13238 of.

This section drafted in accordance with GB/T 1.1-2009 given rules.

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

Introduction

"Inspection of import and export of textile machinery - Part 1. General requirements" is a textile machinery import and export inspection work in accordance with the import and export textile Mechanical testing organizations play a guiding and regulating role.

With China's accession to the World Trade Organization (WTO) and the "People's Republic of China Import and Export Commodity Inspection Law" and its implementing regulations amended Import and Export Commodity Inspection mode has undergone great changes, the state inspection and quarantine departments in charge of the establishment of a system of inspection and quarantine standards.

This part belongs to the inspection and quarantine standards on the third floor --- categories common standard specifies general requirements for textile machinery import and export inspection.

Inspection of import and export of textile machinery Part 1. General requirements

1 Scope

SN/T 3238 provisions of this part of the textile machinery import and export requirements, testing and judgment.

This section applies to the textile industry for the following purposes, all machinery and related equipment.

--- Fiber (staple fiber and filament) yarn and other raw materials or non-woven fabric (including felt) open, clear, mixed, comb, ready carded, Spinning and other processes;

--- Yarn winding and twisting, curling, deformation and crafts and yarn preparation step prior to weaving and knitting;

--- Weaving, knitting, lace weaving and other similar devices forming fabric;

--- Braid, braid ropes rope, twine, nets, and rubbing rope coiling machine except the frame;

Prepare --- fiber, yarn, fabric, braid, rope, etc., bleaching, dyeing, printing and finishing factory and ready;

--- Finished piece dyeing;

--- Warp and weft of finishing, including hosiery, including but not finished suture (ie, sewing);

--- Woven, tufted carpet production processes.

The standard of the rest of additional specific safety requirements take precedence over the corresponding requirements of this section.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements GB/T 5465.2 Graphical symbols for electrical equipment - Part 2. Graphical symbols GB/T 7111.2-2002 Textile machinery - Noise test code - Part 2. spinning preparatory and spinning machinery GB/T 7111.3-2002 Textile machinery - Noise test code - Part 3. Nonwoven machinery unit GB/T 7111.4-2002 Textile machinery - Noise test code - Part 4. Yarn processing, machinery rope GB/T 7111.5-2002 Textile machinery - Noise test code - Part 5. weaving and knitting preparatory machinery GB/T 7111.6-2002 Textile machinery - Noise test code - Part 6. Weaving Machinery GB/T 7111.7-2002 Textile machinery - Noise test code - Part 7. Dyeing & Finishing Machinery GB/T 17780 Textile machinery - Safety requirements

3 Terms and Definitions

The following terms and definitions apply to this document.

Inspection Lot to carry out the inspection and collection of the same specifications, models, under the same production conditions produce a single batch of product, referred to as batch.