Valid

SN/T 3190-2012Determination of aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in crude oil and residual fuel oil. Ashing, fusion-inductively coupled plasma emission spectrometry (English PDF)

原油及残渣燃料油中铝、硅、钒、镍、铁、钠、钙、锌、磷的测定 灰化碱熔-电感耦合等离子体发射光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for SN/T 3190-2012 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

May 7, 2012

Implementation date

November 16, 2012

Scope

SN/T 3190-2012 is the English-translated version of 原油及残渣燃料油中铝、硅、钒、镍、铁、钠、钙、锌、磷的测定 灰化碱熔-电感耦合等离子体发射光谱法.

SN/T 3190-2012 - This standard specifies the use of ash alkali fusion - Determination of petroleum and its products are aluminum, silicon, vanadium, nickel, iron, inductively coupled plasma atomic emission spectrometry, Sodium, calcium, zinc, phosphorus method.

This standard applies to petroleum products, aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc, phosphorus and measured. Determination of the elements as described in Table 1 FIG.

Table 1 Unit measurement range of each element in milligrams per kilogram (mg/kg) Range of elements Aluminum 5 to 150 Si 10 to 250 Sodium 1-100 1 ~ 400 V Nickel 1 to 100 Iron 2 to 60 Calcium 3 - 100 Zinc 1 to 70 Phosphorus 1 - 60

Found what you need?

Document preview — SN/T 3190-2012

National Standard of the People's Republic of China

ICS
75.040
Classification
E21

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Method summary

Foreword

Accordance with the standards GB/T 1.1-2009, rules GB/T 20001.4-2001 given draft.

This revised standard adopts IP501/05 "residual fuel oil in aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus determination ashing alkali fusion -Inductively Coupled Plasma Atomic Emission Spectrometry "(in English).

Compared with this standard IP501/05, mainly to do the following changes.

--- The standard name of the "residual fuel oil" to "crude and residual fuel oil";

--- The scope of the standard by the "residual fuel oil" to "crude and residual fuel oil";

--- Chapter 2, according to GB/T 1.1-2009 requirements to prepare normative references, and references to standards of appropriate National standard;

--- The precision of each element in the form test wavelength adjusted to 7.5.4 and adds test wavelength aluminum and silicon;

--- Narrative precision by GB/T 20001.4-2001 requirements were modified.

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. People's Republic of China Ningbo Exit Inspection and Quarantine.

1 Scope

This standard specifies the use of ash alkali fusion - Determination of petroleum and its products are aluminum, silicon, vanadium, nickel, iron, inductively coupled plasma atomic emission spectrometry, Sodium, calcium, zinc, phosphorus method.

This standard applies to petroleum products, aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc, phosphorus and measured. Determination of the elements as described in Table 1 FIG.

Table 1 Unit measurement range of each element in milligrams per kilogram (mg/kg)

Range of elements

Aluminum 5 to 150

Si 10 to 250

Sodium 1-100

1 ~ 400 V

Nickel 1 to 100

Iron 2 to 60

Calcium 3 - 100

Zinc 1 to 70

Phosphorus 1 - 60

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 4756 petroleum liquids hand sampling method Laboratory use specifications and test methods GB/T 6682 Analysis

3 Method summary

Weighed portion of the sample, ignited and burned, heated in a muffle furnace, to remove the residual carbon. Tetraborate two lithium/lithium fluoride melt flux residues Thereof, the molten mixture is dissolved in tartaric acid and hydrochloric acid solution. After dilution with water, the solution is sucked into the inductively coupled plasma optical emission Spectrometer detected by comparing the sample and standard solutions in emission intensity of a specific wavelength, calculate the concentration of the sample solution measured elements Degrees, and then calculating the concentration of elements in the sample.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 3190-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
7 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 3190-2012

$189.00