SN/T 3121-2012Determination of high cobalt content in Steel. Potentiometric titration method after separation by ion exchange (English PDF)
钢样中高含量钴的测定 离子交换分离电位滴定法
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3121-2012 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
May 7, 2012
Implementation date
November 16, 2012
Scope
SN/T 3121-2012 is the English-translated version of 钢样中高含量钴的测定 离子交换分离电位滴定法.
SN/T 3121-2012 - This standard specifies the ion exchange in steel with high content of cobalt separation method for determining the potentiometric titration. This standard applies to the determination of steel with a high content of cobalt. Measuring range. 5.0% to 17.0%.
Found what you need?
Document preview — SN/T 3121-2012
National Standard of the People's Republic of China
- ICS
- 77.080.20
- Classification
- H40
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Reagents
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses the translation method identical with ISO 11653:1997 "in steel with high content of cobalt by ion exchange separation potential drop Titration. " on a standard text format according to GB/T 1.1-2009 made the following editorial changes.
a) "this International Standard" be replaced by "of this standard."
b) Remove the preface to international standards.
c) Normative documents used in Chinese national standards equivalent standards adopted.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. Gansu People's Republic of China Exit Inspection and Quarantine, Jinchuan Group Limited.
1 Scope
This standard specifies the ion exchange in steel with high content of cobalt separation method for determining the potentiometric titration.
This standard applies to the determination of steel with a high content of cobalt. Measuring range. 5.0% to 17.0%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6379.1 measurement methods and results of Accuracy (trueness and precision) - Part 1. General principles and definitions (ISO 5725-1:1994, IDT) GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the standard measurement method to repeat of the basic methods of reproduction (ISO 5725-2:1994, ID) Specifications and test methods for water GB/T 6682 laboratory analysis GB/T 12808 Laboratory glassware single reticle pipette GB/T 20066 Steel and iron - Sampling and determination of the chemical composition of the sample with a sample preparation method
3 Method summary
With a mixed solution of nitric acid and hydrochloric acid to dissolve the sample. Rinse with hydrochloric acid anion exchange column cobalt separated from interfering elements, and perchloric acid Oxidation, blow nitrogen dissolved chlorine and oxygen. Sample in a mixed solution containing ammonium citrate was added to an excess of standard solution of potassium ferricyanide, Then cobalt standard solution titration of excess potassium ferricyanide.
4 Reagents
Unless otherwise stated, the method used reagents were analytical reagents, test water line with two water GB/T 6682 regulations.
4.1 cobalt (>=99.95%).
4.2 potassium ferricyanide [K3Fe (CN) 6].
4.3 citric acid (C6H8O7. H2O).
4.4 perchloric acid (rho = 1.67g/mL).
NOTE. perchloric acid (rho = 1.54g/mL) can also be used. 100mL perchloric acid (rho = 1.67g/mL) corresponds 127mL perchloric acid (rho = 1.54g/mL).
4.5 nitric acid (rho = 1.40g/mL).
4.6 hydrochloric acid (rho = 1.19g/mL).
Aqueous ammonia 4.7 (rho = 0.89g/mL).
4.8 hydrochloride (75).
4.9 hydrochloride (23).
4.10 hydrochloric acid (12).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6379.1Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
- GB/T 6379.2Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 12808Laboratory glassware - One-mark pipettes
- GB/T 20066Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
ISO 5725
How to Download SN/T 3121-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 3121-2012
$149.00