Valid

SN/T 3056.9-2011Determination of essential parameters of chemical raw materials for use in fireworks and firecrackers. Par 9: Sodium hydrogen carbonate (English PDF)

烟花爆竹用化工原材料关键指标的测定 第9部分:碳酸氢钠

Preview PDF

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for SN/T 3056.9-2011 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

September 9, 2011

Implementation date

April 1, 2012

Scope

SN/T 3056.9-2011 is the English-translated version of 烟花爆竹用化工原材料关键指标的测定 第9部分:碳酸氢钠.

SN/T 3056.9-2011 — SN/T 3056 This section specifies the method for measuring the purity of sodium bicarbonate and sodium bicarbonate in the determination of fireworks, sodium content Method, determination of chloride content, iron content determination, Determination of water-insoluble matter content, moisture content determination, pH Determination of value, moisture absorption rate measuring method, the measuring method fineness.

This section applies to fireworks Determination of sodium bicarbonate sodium bicarbonate purity testing, measuring sodium content, chloride content Measuring set, Determination of iron content, Determination of water insoluble matter content, moisture content, pH value determination, the determination of moisture absorption rate was measured fineness.

Found what you need?

Document preview — SN/T 3056.9-2011

National Standard of the People's Republic of China

Classification
Y 88

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3.1 Drying the sample
  • 3.2 Determination of water-insoluble content

Foreword

"Determination of fireworks with chemical raw materials key indicators" SN/T 3056 series of standards is divided into 15 parts.

--- Part 1. potassium hydrogen phthalate;

--- Part 2. sodium fluoride;

--- Part 3. Red Lead;

--- Part 4. basic copper carbonate;

--- Part 5. sulfur;

--- Part 6. strontium sulfate;

--- Part 7. copper sulfate;

--- Part 8. potassium chlorate;

--- Part 9. sodium bicarbonate;

--- Part 10. strontium carbonate;

--- Part 11. iron;

--- Part 12. barium nitrate;

--- Part 13. Silver nitrate;

--- Part 14. bismuth oxide;

--- Part 15. potassium dichromate.

This section SN/T 3056 Part 9.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

1 Scope

SN/T 3056 This section specifies the method for measuring the purity of sodium bicarbonate and sodium bicarbonate in the determination of fireworks, sodium content Method, determination of chloride content, iron content determination, Determination of water-insoluble matter content, moisture content determination, pH Determination of value, moisture absorption rate measuring method, the measuring method fineness.

This section applies to fireworks Determination of sodium bicarbonate sodium bicarbonate purity testing, measuring sodium content, chloride content Measuring set, Determination of iron content, Determination of water insoluble matter content, moisture content, pH value determination, the determination of moisture absorption rate was measured fineness.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

Preparation of GB/T 601 chemical reagent standard titration solution General Method GB/T 3049 Industrial chemicals determination of iron content 1,10-phenanthroline spectrophotometry GB/T 6003.1 Test sieves of metal wire cloth Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 8170 repair value expressed about the rules and limit values and judgment Test Method 3

3.1 Drying the sample

Sample at 105 °C ± 2 °C dried 3h, into the dryer to cool reserve. After drying the sample for the addition of water, fine givers items seized Measured by.

3.2 Determination of water-insoluble content

3.2.1 Principle

After the sample was dissolved in water, filtered, dried and insoluble matter was weighed.

3.2.2 Instruments

3.2.2.1 Drying oven. Controlled temperature 105 °C ± 2 °C.

3.2.2.2 Analytical balance. accuracy of 0.1mg.

3.2.2.3 4 emery core Crucible. volume 30mL. After pumping water sufficiently washed, dried at 105 °C 3h, cooled in a desiccator.

3.2.2.4 filtration device set.

3.2.3 Analysis of step

3.2.3.1 Weigh a sample of about 10g, accurate to 0.1mg, dissolved in 300mL water and heated until dissolved.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 3056.9-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
7 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 3056.9-2011

$229.00