SN/T 3056.12-2011Determination of essential parameters of chemical raw materials for use in fireworks and firecrackers. Part 12: Barium nitrate (English PDF)
烟花爆竹用化工原材料关键指标的测定 第12部分:硝酸钡
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3056.12-2011 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
September 9, 2011
Implementation date
April 1, 2012
Scope
SN/T 3056.12-2011 is the English-translated version of 烟花爆竹用化工原材料关键指标的测定 第12部分:硝酸钡.
SN/T 3056.12-2011 — SN/T 3056 provisions of this part of the fireworks used in the determination of barium nitrate, barium content, determination of nitrate content of strontium Determination square measuring method combined amount of calcium, iron content determination, Determination of insoluble matter, determination of moisture, chloride content Determination method, determination of pH, moisture absorption rate, the determination of fineness.
This section applies to fireworks used in barium content of barium nitrate was measured for nitrate content was measured strontium calcium combined amount of iron content Determination, Determination of water insoluble, moisture determination, of chloride content, pH measurement, the moisture absorption rate, the determination of fineness.
Found what you need?
Document preview — SN/T 3056.12-2011
National Standard of the People's Republic of China
- Classification
- Y 88
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3.1 Drying the sample
- 3.2 Determination of moisture content
Foreword
"Determination of fireworks with chemical raw materials key indicators" SN/T 3056 series of standards is divided into 15 parts.
--- Part 1. potassium hydrogen phthalate;
--- Part 2. sodium fluoride;
--- Part 3. Red Lead;
--- Part 4. basic copper carbonate;
--- Part 5. sulfur;
--- Part 6. strontium sulfate;
--- Part 7. copper sulfate;
--- Part 8. potassium chlorate;
--- Part 9. sodium bicarbonate;
--- Part 10. strontium carbonate;
--- Part 11. iron;
--- Part 12. barium nitrate;
--- Part 13. Silver nitrate;
--- Part 14. bismuth oxide;
--- Part 15. potassium dichromate.
This section SN/T 3056 Part 12.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
1 Scope
SN/T 3056 provisions of this part of the fireworks used in the determination of barium nitrate, barium content, determination of nitrate content of strontium Determination square measuring method combined amount of calcium, iron content determination, Determination of insoluble matter, determination of moisture, chloride content Determination method, determination of pH, moisture absorption rate, the determination of fineness.
This section applies to fireworks used in barium content of barium nitrate was measured for nitrate content was measured strontium calcium combined amount of iron content Determination, Determination of water insoluble, moisture determination, of chloride content, pH measurement, the moisture absorption rate, the determination of fineness.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Preparation of GB/T 601 chemical reagent standard titration solution GB/T 3051-2000 inorganic chemical products Determination of mercury chloride General Method GB/T 6003.1 Test sieves of metal wire cloth Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 8170 repair value expressed about the rules and limit values and judgment Test Method 3
3.1 Drying the sample
Sample at 105 °C ± 2 °C dried 3h, into the dryer to cool reserve. After drying the sample project to detect water points outside use.
3.2 Determination of moisture content
3.2.1 Principle
Sample at 105 °C under dry mass difference before and after drying is called in a sample of water.
3.2.2 Instruments
3.2.2.1 Drying oven. Controlled temperature 105 °C ± 2 °C.
3.2.2.2 Analytical balance. accuracy of 0.1mg.
3.2.2.3 weighing bottle. phi60mm × 35mm.
3.2.3 Analysis of step
3.2.3.1 Weigh about 5g sample, accurate to 0.1mg, placed in 105 °C drying to constant weight weighing bottle.
3.2.3.2 The weighing bottle placed in an oven, under the conditions of 105 °C ± 2 °C drying 2h, taken in an ordinary dryer cooled to room temperature
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 3051-2000General methods for the determination of chloride content in inorganic chemical products — Mercurimetric method and ion chromatography method
- GB/T 6003.1Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
How to Download SN/T 3056.12-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6003.1-2022 — Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
GB/T 601-2016 — Chemical Reagent - Preparations of Standard Volumetric Solutions
GB/T 6011-2005 — Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method
Secure payment via Stripe
Payments accepted
SN/T 3056.12-2011
$269.00