SN/T 2494-2010General stipulation for drafting of standards on technical requirements of electrical and mechanical products for import and export (English PDF)

Foreword

This standard is based on GB/T 1.1-2009 "Standardization Guide Part 1. Standard structure and preparation of" be written.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. People's Republic of China Fujian Exit Inspection and Quarantine, Shenzhen People's Republic of China Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Shanghai Entry-Exit Inspection and Quarantine Bureau.

Introduction

Import and export of electromechanical products technical requirements of the standard test is an important part of the import and export of electromechanical products the industry standard test systems, test the Import and export of electromechanical products and quarantine authorities to implement an important basis for inspection.

The actual standard binding inspection and quarantine work, mechanical and electrical products import and export inspection standard technical requirements for the preparation of the establishment of a framework, were specification.

This standard belongs to the inspection and quarantine standards second layer --- professional common standards.

Import and export of electromechanical products testing technical requirements of the standard Preparation of basic provisions

1 Scope

This standard specifies the technical requirements for the import and export of electromechanical products testing standard (hereinafter referred to as the "Technical Requirements Standards") and the preparation of the basic structure Claim.

This standard applies to the preparation of the technical requirements of the standard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 1.1-2009 for standardization - Part 1. Standard structure and drafting

3 Terms and Definitions

GB/T 1.1-2009 and define the following terms and definitions apply to this document.

The method permits the product to be achieved by the features that can be expressed qualitatively or quantify its limits be prescribed, and through the provision of Real property compliance.

4 Basic requirements

4.1 Technical requirements for the preparation of standards should be consistent with GB/T 1.1-2009 requirements.

4.2 in import and export mechanical and electrical inspection professional industry standard system, under normal circumstances, according to a standardized technical requirements of the standard objects (products) View the categories,, divided into several parts to write family.

4.3 For the energy into a separate category, not attributable to a particular type of product, you can write individual technical requirements of the product standard.

4.4 Technical inspection techniques shall be no less than the national mandatory requirements and technical specifications of the agreement between China and trading countries (regions) signed by the provisions of Surgery requirements. No mandatory requirements of national technical specification or agreement, imports, should not be lower than the national designated AQSIQ Standards, industry standards; export products, should not be less than imports (input) country (region) standards, import (input) country (region) no phase should be the standard, it should not be less than AQSIQ designated international standards.

5 Structure and format