SN/T 1891.12-2007Hygienic standard for import and export microwave food containers and packaging materials. Part 12: Products of polyethylene terphthalate (English PDF)
进出口微波食品包装容器及包装材料卫生标准 第12部分：聚对苯二甲酸乙二醇酯成型品
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for SN/T 1891.12-2007 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
August 6, 2007
Implementation date
March 1, 2008
Scope
SN/T 1891.12-2007 is the English-translated version of 进出口微波食品包装容器及包装材料卫生标准 第12部分：聚对苯二甲酸乙二醇酯成型品.
SN/T 1891.12-2007 — This section SN/T 1891 provides for import and export microwave food containers and packaging materials used polyethylene terephthalate molded article Health requirements and test methods.
This section applies to the import and export microwave food containers and packaging materials used polyethylene terephthalate resin as raw material, by injection, Pull, blow into the legal system of containers and films, but also for containing beverages, food seasonings, edible oils and fats as well as a composite food packaging bags composite material.
Found what you need?
Document preview — SN/T 1891.12-2007
National Standard of the People's Republic of China
- ICS
- 67.040
- Classification
- C 53
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Technical Specifications
- 4.1 Sensory Index
- 4.2 Appearance
- 4.4 Microwave durability
Foreword
SN/T 1891 "Importers microwave food containers and packaging materials hygiene standards" is divided into 13 parts.
--- Part 1. polypropylene molded article;
--- Part 2. melamine products;
--- Zi 3. polyethylene products;
--- Part 4. PVC moldings;
--- Part 5. polystyrene products;
--- Part 6. glass products;
--- Part 7. vinylidene chloride - vinyl chloride copolymer resin;
--- Part 8. polycarbonate resin;
--- Part 9. polyethylene terephthalate resin;
--- Part 10. polystyrene resin;
--- Part 11. Polypropylene resin;
--- Part 12. polyethylene terephthalate molded article;
--- Part 13. polyvinyl chloride resin.
This section SN/T 1891 Part 12.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section is drafted. Tianjin People's Republic of China Exit Inspection and Quarantine.
1 Scope
This section SN/T 1891 provides for import and export microwave food containers and packaging materials used polyethylene terephthalate molded article Health requirements and test methods.
This section applies to the import and export microwave food containers and packaging materials used polyethylene terephthalate resin as raw material, by injection, Pull, blow into the legal system of containers and films, but also for containing beverages, food seasonings, edible oils and fats as well as a composite food packaging bags composite material.
2 Normative references
The following documents contain provisions which, through reference SN/T 1891 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 5009.60 food packaging, polyethylene, polystyrene, polypropylene moldings health standard analytical methods of GB/T 5009.101 food containers and packaging materials in polyester resin and molded article was measured antimony GB/T 5009.127 food packaging polyester resin and products Determination of germanium
3 Terms and Definitions
The following terms and definitions apply to SN/T 1891 to the present section.
With a heating system for the 2450MHz frequency band of electromagnetic waves.
4 Technical Specifications
4.1 Sensory Index
It shall not be a foreign body odor.
4.2 Appearance
4.2.1 can not have cracks filled mouth and inadequate.
4.2.2 can not have obvious foreign body, blistering, model defects, welding trace, wire cutters, burrs, expansion and other defects.
4.2.3 can not significantly change color, fade, uneven color depth (with the exception of decorative requirements), and other stains.
4.2.4 If the coating, the coating surface should be no sagging, peeling, cracking, holes, bubbles and the like.
4.2.5 container and the lid should match.
4.2.6 The container should be placed stable.
High-frequency microwave heating indicator 4.3 it appears to be no spark, no defects and anomalies.
4.4 Microwave durability
There should be no discoloration, defects or abnormalities.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
How to Download SN/T 1891.12-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5009.127-2003 — Determination of germanium in polyester resin and products for food packaging
GB/T 5009.60-2003 — Method for analysis of hygienic standard of products of polyethylene, polystyrene and polypropylene for food packaging
SN/T 1891.10-2007 — Hygienic standard for import and export microwave food containers and packaging materials. Part 10: Polystyrene resin
Secure payment via Stripe
Payments accepted
SN/T 1891.12-2007
$204.00