Valid

SN/T 1828.15-2016Test method of classification for import and export dangerous goods--Part 15: Self-heating solids (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (4 pages)

Need quotation for your management?

Get a formal quotation for SN/T 1828.15-2016 in 30 minutes.

Issued by

The General Administration of Quality Supervision, Inspection and Quarantine

Level / Type

National · Recommended

Issue date

December 12, 2016

Implementation date

July 1, 2017

Scope

SN/T 1828.15-2016 (Test method of classification for import and export dangerous goods--Part 15: Self-heating solids) is available as an English-translated PDF.

SN/T 1828.15-2016 — This part of SN/T 1828 specifies the classification test method and category determination of self-heating solid dangerous goods. This section applies to the classification and identification test of the hazard characteristics of self-heating solid dangerous goods.

Found what you need?

Document preview — SN/T 1828.15-2016

National Standard of the People's Republic of China

Classification
A 80
Replacing
SN/T 1828.15-2006

Issued by: The General Administration of Quality Supervision, Inspection and Quarantine

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Test
  • 4.1 Purpose of the test
  • 4.2 Number of samples

Foreword

SN/T 1828 "Import and Export Dangerous Goods Classification Test Method" is divided into 17 parts.

--- Part 1. General;

--- Part 2. Civil Explosives;

--- Part 3. Oxide;

---Part 4. Corrosive substances;

---Part 5. Gas mixture;

--- Part 6. release flammable substances in contact with water;

---Part 7. Compressed gas;

---Part 8. Organic peroxides;

---Part 9. Toxic substances;

---Part 10. Toxic gases;

--- Part 11. Flammable solids;

---Part 12. Flammable gas;

---Part 13. Flammable liquids;

--- Part 14. Lithium battery pack;

---Part 15. Self-heating solids;

---Part 16. Nitrate substances;

--- Part 17. Marine pollutants.

This part is the 15th part of SN/T 1828.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This part replaces SN/T 1828.15-2006 "Import and export dangerous goods classification test method Part 15. Self-heating solids", and the main technical changes of SN/T 1828.15-2006 are as follows.

--- Modify 4.2 sample number "300mm3" to "not less than 2.02 × 10-3m3";

--- Modify the "rise" in 4.5.2 to "raise to";

--- Modify 4.5.4b) "greater than" is "not greater than".

This part is proposed and managed by the National Certification and Accreditation Administration.

This section drafted by. Tianjin Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China.

1 Scope

This part of SN/T 1828 specifies the classification test method and category determination of self-heating solid dangerous goods.

This section applies to the classification and identification test of the hazard characteristics of self-heating solid dangerous goods.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Recommendation test and standard manual on the transport of dangerous goods

3 Terms and definitions

The following terms and definitions are defined in the Manual of Recommendations and Standards for the Transport of Dangerous Goods and apply to this document.

Pyrophoric substance when a small amount of material is in contact with air for less than 5 minutes, spontaneous combustion of solids and liquids occurs.

Self-heating solids

It is a solid substance other than the pyrophoric substance that can self-heat without contact with the air.

Note. This type of material is only very large (several kilograms) and will burn after a long period of time (hours or days).

4 Test

4.1 Purpose of the test

This test is carried out by placing the substance in a 25 mm or 100 mm cube sample container and exposed to a temperature of 100 ° C, 120 ° C or in the air at 140 ° C, determine whether the substance will spontaneously initiate fire or spontaneous combustion.

4.2 Number of samples

A representative substance is taken from the goods to be inspected, not less than 2.02×10-3m3, for the hazardous property test.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 1828.15-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
4 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 1828.15-2016

$114.00