SN/T 1657.1-2007Rules for the inspection of motor-operated electric tools for import and export. Part 1: General requirements (English PDF)

Foreword

SN/T 1657 "for the inspection of import and export of power tools" consist of several components, the expected structure.

--- Part 1. General requirements;

--- Part 2. electric chain saws;

--- Part 3. handheld planer;

--- Part 4. electric reciprocating saws;

--- Part 5. hand-held power for routers and hand-held electric trimmer;

--- Part 6. Pressure Washer;

--- Part 7. profile cutting machine.

--- Part 8. stone cutting machine;

--- Part 9. Circular saw;

This section SN/T 1657 Part 1.

This section from the date of publication instead of following industry standards.

--- SN/T 0733.1-1997 exports of hand-held power tool safety inspection procedures

--- SN/T 0733.2-1997 exports of hand-held power tools Hammer inspection procedures

--- Inspection of SN/T 0733.3-1997 exports of hand-held power tool electric angle grinder

--- SN/T 0733.4-1997 exports of hand-held power tool drill, impact drill inspection procedures

--- SN/T 0934-2000 and export belt machine inspection procedures

--- SN/T 1061.1-2002 Importers Portable Power Tools Circular Saw inspection procedures

--- SN/T 1061.2-2002 can import and export electric tools band saw for the inspection this section proposed and managed by the National Certification and Accreditation Administration Committee.

Introduction

"Import and export of power tools for the inspection," the import and export power tool inspection work in accordance with the import and export of power tools serve to guide inspection and normative role.

With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established system.

This part belongs to the inspection and quarantine standards on the third floor --- categories of common standards, provides for import and export of power tools test General requirements.

Power tools for the inspection of import and export Part 1. General requirements

1 Scope

SN/T 1657 This section specifies the requirements for the import and export of power tools, testing and judgment.

This section applies to hand-held, transportable power tool (hereinafter referred to as power tools) import and export inspection.

2 Normative references

The following documents contain provisions which, through reference SN/T 1657 this section, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1:1999, IDT) GB Safety first part hand - held motor electric tools. General requirements (IEC 60745-1:2003, IDT) GB 4343.1 EMC household appliances, electric tools and similar apparatus - Part 1. Emission (GB 4343.1-2003, CISPR14-1.2000, IDT) GB 13960-1992 transportable electric tools - Safety Part 1. General Requirements (idt IEC 61029-1:1990) GB 17625.1 Electromagnetic Compatibility Limits for harmonic current emissions (equipment input current <=16A) (GB 17625.1-2003, IEC 61000-3-2:2001, IDT) the basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared

3 Terms and Definitions

GB 3883.1-2005, GB 13960-1992, GB/T 2828.1-2003 and SN/T 0002 and established the following terms and Definitions apply SN/T 1657 this part.

According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.

According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to on-site inspection requirements for product pumping batch inspection Inspection, supervision and implementation of the conformity assessment activities of the enterprise quality management system.

According to the mandatory requirements of national technical specifications, inspection certificate and inspection documents, goods are consistent with the random testing can be carried out when necessary, and real Shi conformity assessment activities supervision.

To carry out the inspection and collection of the same specifications, models produced under the same conditions of production per unit of product, referred to as batch.