SN/T 1636.10-2005Import and export tire inspection regulations, Part 10: OTR tire (English PDF)

Foreword

SN/T 1636 "Import and Export Tire Inspection Regulations" is divided into 11 parts.

--- Part 1. General requirements for quality and safety;

--- Part 2. Sampling methods;

--- Part 3. Appearance quality inspection;

--- Part 4. Car tires;

---Part 5. Truck tires;

---Part 6. Motorcycle tires;

---Part 7. Industrial vehicle pneumatic tires;

---Part 8. Agricultural tires;

---Part 9. Force car tires;

---Part 10. Construction machinery tires;

--- Part 11. Pneumatic tire inner tube.

This part is the 10th part of SN/T 1636.

This part is proposed and managed by the National Certification and Accreditation Administration.

This section drafted by. Tianjin Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China.

Drafters of this section. Fu Hai, Liu Huaxin, Zhang Ming, Jiang Feng.

This section is the first industry standard for entry-exit inspection and quarantine.

SN/T 1636.10-2005

Import and export tire inspection procedures Part 10. Construction machinery tires

1 Scope

This part stipulates the sampling, inspection, determination of inspection results and disqualification of import and export engineering machinery tires.

This section applies to the inspection and determination of import and export engineering machinery tires.

2 Normative references

The provisions in the following documents become the provisions of this part by reference to this part of SN/T 1636. Quotations with dated and all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved in accordance with this section.

The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section.

GB/T 519 pneumatic tire physical property test method GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber (GB/T 528-1998, eqv ISO 37.

1994)

GB/T 531 rubber pocket hardness tester hardness test method (GB/T 531-1999, idt ISO 7619:1986) GB/T 532 vulcanized rubber or thermoplastic rubber - Determination of bond strength (GB/T 532-1997, idt ISO 36:1993) GB/T 1689 vulcanized rubber - Determination of wear resistance (with acronym abrasion machine) (GB/T 1689-1998, neqBS903. Part A9. 1988) GB/T 6326 tire terminology (GB/T 6326-1994, neq ISO 3877-1:1978) SN/T 1636.2-2005 Inspection procedures for import and export tyres - Part 2 SN/T 1636.3-2005 Inspection procedures for import and export tyres - Part 3

3 Terms and definitions

The following terms and definitions established by GB/T 6326 apply to this part of SN/T 1636.

The same variety produced under the same conditions is an inspection lot.

The basic unit divided to meet the needs of the sampling test.

4 Sampling

Execute according to SN/T 1636.2-2005.

5 Inspection