SJ/T 11948-2024Technical specification for earthquake resistance of electronic information equipment installation projects (English PDF)
电子信息设备安装工程抗震技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for SJ/T 11948-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 10, 2024
Implementation date
April 1, 2025
Scope
SJ/T 11948-2024 is the English-translated version of 电子信息设备安装工程抗震技术规范.
SJ/T 11948-2024 is the Chinese standard "Technical specification for earthquake resistance of electronic information equipment installation projects".
This standard specifies the outline of general principles, terms and symbols, basic regulations, seismic design, seismic isolation design, installation and acceptance, maintenance and appendices, totaling 7 chapters and 3 appendices.
This standard strives to standardize the seismic resistance of electronic information installation projects from planning, design, installation and maintenance.
It was issued by Ministry of Industry and Information Technology. Issued on 2024-12-10, in force from 2025-04-01.
Found what you need?
Document preview — SJ/T 11948-2024
National Standard of the People's Republic of China
- ICS
- 35.180
- Classification
- L62
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 1.1 Subject Contents
- 1.2 Application Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Height of Raised Access Floor
- 3.2 Abbreviations
- 3.3 Bearing of Four Conner
- 3.4 Systematically Resistance of Raised Access Floor
- 4 Requirements
- 4.1 Relation between the Host and the Device
- 4.2 UTI Interface
- 4.3 Requirements for the Physical Layer of UTI Device
- 4.4 Transport Stream Interface
- 4.5 Command Data Interface
- 4.6 Characteristic Requirements for UTI Physical Layer
- 5 Instruments, equipment, and materials
- 5.1 Diagram of Module in Connection with Host
- 5.2 DTV-CI Interface
- 5.4 Command Interface
- 5.5 Physical Requirement
- 5.6 UTI-HTU
- 5.7 Measuring Condition
- 6 Sample processing and determination
- 6.1 TSI-Physical, Link Layers
- 6.2 TSI-Transport Layer
- 6.3 TSI - Upper Layers
- 6.4 Initialization Test
- 6.5 Resource Manager Test
- 6.6 Application Information Resource Test
- 6.7 Date-time Information Resource Test
- 6.8 CA Application Resource Test
- 6.9 UTI Device TS Test
- 7 Marking, packaging, transportation and storage
- 7.1 Data Structure
- 7.2 Transport Layer
- 7.3 Session Layer
- 7.4 Resource of Resource Manager
- 7.5 Application Information Resources
- 7.6 Date and Time Information Resources
- 7.9 Hot Plugging/Unplugging Test
- 8 Test report
- 8.1 Introduction
- 8.2 Resources
- 8.3 Application Protocol Data Units (APDU)
- 8.4 System Management Resources
- 8.5 Host Control and Information Resources
- 8.6 Man-Machine Interface Resource
- 8.7 Resource Identifiers and Application Object Tags
- 9.1 Electromagnetic Compatibility
- 9.2 Safety
- 9.3 Materials
1 Foreword
SJ/T 11948-2024 was issued by Ministry of Industry and Information Technology on 10 December 2024 and has been in force since 1 April 2025.
The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the outline of general principles, terms and symbols, basic regulations, seismic design, seismic isolation design, installation and acceptance, maintenance and appendices, totaling 7 chapters and 3 appendices. This standard strives to standardize the seismic resistance of electronic information installation projects from planning, design, installation and maintenance.
SJ/T 11948-2024 falls under ICS 35.180, in the field of information technology.
This catalogue holds 116 other SJ/T standards in that field.
In this catalogue, SJ/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Electronics Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 34948-2017 — Information technology—Basic requirements for 8-way and above server functions
GB/T 9813.3-2017 — General specification for computer—Part 3: Server
SJ/T 11654-2016 — General Specification for Solid State Disk
SJ/T 11942-2024 — Technical requirements for safe and reliable workstations
SJ/T 11941-2024 — Technical requirements for secure and reliable servers
SJ/T 11940-2024 — Technical requirements for safe and reliable portable microcomputers
5 Classification and status
International classification (ICS): 35.180
Chinese Standard Classification (CCS): L 62
Prefix SJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download SJ/T 11948-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SJ/T 12063-2026 — Test method of electric double layer capacitor system for road vehicles
SJ/T 12097-2026 — Information technology - Software bill of materials data format specification
SJ/T 12099-2026 — Technical specifications for industrial AI visual appearance inspection systems
SJ/T 11948-2024
$740.00