SJ/T 11750-2019Green Design Product Evaluation Technical Specifications Smart Terminal Tablet PC (English PDF)
绿色设计产品评价技术规范 智能终端 平板电脑
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for SJ/T 11750-2019 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2019
Implementation date
July 1, 2020
Scope
SJ/T 11750-2019 is the English-translated version of 绿色设计产品评价技术规范 智能终端 平板电脑.
SJ/T 11750-2019 is the Chinese standard "Green Design Product Evaluation Technical Specifications Smart Terminal Tablet PC". This standard specifies the green design product evaluation requirements, evaluation methods, and product life cycle evaluation report preparation methods for tablet computers.
This standard applies to the evaluation of green design products for tablet computers. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — SJ/T 11750-2019
National Standard of the People's Republic of China
- ICS
- 13.020.20; 31.020
- Classification
- L10
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 1.1 Subject Contents
- 1.2 Application Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Height of Raised Access Floor
- 3.2 Abbreviations
- 3.3 Bearing of Four Conner
- 3.4 Systematically Resistance of Raised Access Floor
- 4 Requirements
- 4.1 Relation between the Host and the Device
- 4.2 UTI Interface
- 4.3 Requirements for the Physical Layer of UTI Device
- 4.4 Transport Stream Interface
- 4.5 Command Data Interface
- 4.6 Characteristic Requirements for UTI Physical Layer
- 5 Instruments, equipment, and materials
- 5.1 Diagram of Module in Connection with Host
- 5.2 DTV-CI Interface
- 5.4 Command Interface
- 5.5 Physical Requirement
- 5.6 UTI-HTU
- 5.7 Measuring Condition
- 6 Sample processing and determination
- 6.1 TSI-Physical, Link Layers
- 6.2 TSI-Transport Layer
- 6.3 TSI - Upper Layers
- 6.4 Initialization Test
- 6.5 Resource Manager Test
- 6.6 Application Information Resource Test
- 6.7 Date-time Information Resource Test
- 6.8 CA Application Resource Test
- 6.9 UTI Device TS Test
- 7 Marking, packaging, transportation and storage
- 7.1 Data Structure
- 7.2 Transport Layer
- 7.3 Session Layer
- 7.4 Resource of Resource Manager
- 7.5 Application Information Resources
- 7.6 Date and Time Information Resources
- 7.9 Hot Plugging/Unplugging Test
- 8 Test report
- 8.1 Introduction
- 8.2 Resources
- 8.3 Application Protocol Data Units (APDU)
- 8.4 System Management Resources
- 8.5 Host Control and Information Resources
- 8.6 Man-Machine Interface Resource
- 8.7 Resource Identifiers and Application Object Tags
- 9.1 Electromagnetic Compatibility
- 9.2 Safety
- 9.3 Materials
1 Foreword
SJ/T 11750-2019 was issued by Ministry of Industry and Information Technology on 24 December 2019 and has been in force since 1 July 2020.
The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 9 pages in English translation.
2 Scope Preview
This standard specifies the green design product evaluation requirements, evaluation methods, and product life cycle evaluation report preparation methods for tablet computers. This standard applies to the evaluation of green design products for tablet computers.
SJ/T 11750-2019 falls under ICS 13.020.20; 31.020, in the field of environment and health protection, safety.
This catalogue holds 15 other SJ/T standards in that field.
In this catalogue, SJ/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Electronics Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 9 pages (approximate)
Chinese original: about 13,113 characters
4 Related standards
Standards on related subjects:
SN/T 3512-2013 — Determination of tetrabromobisphenol A bis(2, 3-dibromopropyl ether) in electrical and electronic equipment. High performance liquid chromatography
GB/T 26125-2011 — Electrical and electronic products -- Determination of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
SJ/Z 11388-2009 — General guidelines of environment-friendly use period of electronic information products
SJ/T 12004-2025 — Determination of phthalates in electrical and electronic products - Thermal desorption-gas chromatography
SJ/T 11919-2023 — Guidelines for limiting the types of volatile organic compounds released by electrical and electronic products and setting thresholds
SJ/T 11749-2019 — Technical Specification for Green Design Product Evaluation Printers and All-in-Ones
5 Classification and status
International classification (ICS): 13.020.20; 31.020
Chinese Standard Classification (CCS): L 10
Prefix SJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
How to Download SJ/T 11750-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SJ/T 12063-2026 — Test method of electric double layer capacitor system for road vehicles
SJ/T 12097-2026 — Information technology - Software bill of materials data format specification
SJ/T 12099-2026 — Technical specifications for industrial AI visual appearance inspection systems
SJ/T 11750-2019
$225.00