Valid

SJ/T 11749-2019Technical Specification for Green Design Product Evaluation Printers and All-in-Ones (English PDF)

绿色设计产品评价技术规范 打印机及多功能一体机

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for SJ/T 11749-2019 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

January 1, 2019

Implementation date

July 1, 2020

Scope

SJ/T 11749-2019 is the English-translated version of 绿色设计产品评价技术规范 打印机及多功能一体机.

SJ/T 11749-2019 is the Chinese standard "Technical Specification for Green Design Product Evaluation Printers and All-in-Ones". This standard specifies the green design product evaluation requirements and evaluation methods for printers and digital multifunction machines, as well as the preparation method for product life cycle evaluation reports.

This standard applies to laser printers, inkjet printers, thermal printers, dot matrix printers, and digital multi-function printers that use printing as the basic function with A4 and A3 paper sizes and a maximum printing speed of less than or equal to 70 pages per minute.

Green Design Product Evaluation of Machines. It was issued by Ministry of Industry and Information Technology.

Found what you need?

Document preview — SJ/T 11749-2019

National Standard of the People's Republic of China

ICS
13.020.20; 31.020
Classification
L10

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Subject Contents
  • 1.2 Application Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Height of Raised Access Floor
  • 3.2 Abbreviations
  • 3.3 Bearing of Four Conner
  • 3.4 Systematically Resistance of Raised Access Floor
  • 4 Requirements
  • 4.1 Relation between the Host and the Device
  • 4.2 UTI Interface
  • 4.3 Requirements for the Physical Layer of UTI Device
  • 4.4 Transport Stream Interface
  • 4.5 Command Data Interface
  • 4.6 Characteristic Requirements for UTI Physical Layer
  • 5 Instruments, equipment, and materials
  • 5.1 Diagram of Module in Connection with Host
  • 5.2 DTV-CI Interface
  • 5.4 Command Interface
  • 5.5 Physical Requirement
  • 5.6 UTI-HTU
  • 5.7 Measuring Condition
  • 6 Sample processing and determination
  • 6.1 TSI-Physical, Link Layers
  • 6.2 TSI-Transport Layer
  • 6.3 TSI - Upper Layers
  • 6.4 Initialization Test
  • 6.5 Resource Manager Test
  • 6.6 Application Information Resource Test
  • 6.7 Date-time Information Resource Test
  • 6.8 CA Application Resource Test
  • 6.9 UTI Device TS Test
  • 7 Marking, packaging, transportation and storage
  • 7.1 Data Structure
  • 7.2 Transport Layer
  • 7.3 Session Layer
  • 7.4 Resource of Resource Manager
  • 7.5 Application Information Resources
  • 7.6 Date and Time Information Resources
  • 7.9 Hot Plugging/Unplugging Test
  • 8 Test report
  • 8.1 Introduction
  • 8.2 Resources
  • 8.3 Application Protocol Data Units (APDU)
  • 8.4 System Management Resources
  • 8.5 Host Control and Information Resources
  • 8.6 Man-Machine Interface Resource
  • 8.7 Resource Identifiers and Application Object Tags
  • 9.1 Electromagnetic Compatibility
  • 9.2 Safety
  • 9.3 Materials

1 Foreword

SJ/T 11749-2019 was issued by Ministry of Industry and Information Technology on 24 December 2019 and has been in force since 1 July 2020.

The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 9 pages in English translation.

2 Scope Preview

This standard specifies the green design product evaluation requirements and evaluation methods for printers and digital multifunction machines, as well as the preparation method for product life cycle evaluation reports. This standard applies to laser printers, inkjet printers, thermal printers, dot matrix printers, and digital multi-function printers that use printing as the basic function with A4 and A3 paper sizes and a maximum printing speed of less than or equal to 70 pages per minute. Green Design Product Evaluation of Machines.

SJ/T 11749-2019 falls under ICS 13.020.20; 31.020, in the field of environment and health protection, safety.

This catalogue holds 15 other SJ/T standards in that field.

In this catalogue, SJ/T standards carry edition years from 1980 to 2026.

3 About this standard

Sector: Electronics Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 9 pages (approximate)

Chinese original: about 13,136 characters

4 Related standards

Standards on related subjects:

SN/T 3512-2013 — Determination of tetrabromobisphenol A bis(2, 3-dibromopropyl ether) in electrical and electronic equipment. High performance liquid chromatography

GB/T 26125-2011 — Electrical and electronic products -- Determination of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)

SJ/Z 11388-2009 — General guidelines of environment-friendly use period of electronic information products

SJ/T 12004-2025 — Determination of phthalates in electrical and electronic products - Thermal desorption-gas chromatography

SJ/T 11919-2023 — Guidelines for limiting the types of volatile organic compounds released by electrical and electronic products and setting thresholds

SJ/T 11750-2019 — Green Design Product Evaluation Technical Specifications Smart Terminal Tablet PC

5 Classification and status

International classification (ICS): 13.020.20; 31.020

Chinese Standard Classification (CCS): L 10

Prefix SJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

How to Download SJ/T 11749-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SJ/T 11749-2019

$225.00