Valid

SJ/T 11743.2-2019Piezoelectric and dielectric devices for frequency control and selection Terminology Part 2: Piezoelectric and dielectric filters (English PDF)

频率控制与选择用压电和介电器件 术语 第2部分:压电和介电滤波器

Preview PDF

This is a limited preview

Buy now to download the full PDF (12 pages)

Need quotation for your management?

Get a formal quotation for SJ/T 11743.2-2019 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

January 1, 2019

Implementation date

April 1, 2020

Scope

SJ/T 11743.2-2019 is the English-translated version of 频率控制与选择用压电和介电器件 术语 第2部分:压电和介电滤波器.

SJ/T 11743.2-2019 is the Chinese standard "Piezoelectric and dielectric devices for frequency control and selection Terminology Part 2: Piezoelectric and dielectric filters".

This standard specifies the latest terms and definitions of piezoelectric and dielectric filters for frequency control and selection. It was issued by Ministry of Industry and Information Technology.

Found what you need?

Document preview — SJ/T 11743.2-2019

National Standard of the People's Republic of China

ICS
31.140
Classification
L21

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Subject Contents
  • 1.2 Application Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Height of Raised Access Floor
  • 3.2 Abbreviations
  • 3.3 Bearing of Four Conner
  • 3.4 Systematically Resistance of Raised Access Floor
  • 4 Requirements
  • 4.1 Relation between the Host and the Device
  • 4.2 UTI Interface
  • 4.3 Requirements for the Physical Layer of UTI Device
  • 4.4 Transport Stream Interface
  • 4.5 Command Data Interface
  • 4.6 Characteristic Requirements for UTI Physical Layer
  • 5 Instruments, equipment, and materials
  • 5.1 Diagram of Module in Connection with Host
  • 5.2 DTV-CI Interface
  • 5.4 Command Interface
  • 5.5 Physical Requirement
  • 5.6 UTI-HTU
  • 5.7 Measuring Condition
  • 6 Sample processing and determination
  • 6.1 TSI-Physical, Link Layers
  • 6.2 TSI-Transport Layer
  • 6.3 TSI - Upper Layers
  • 6.4 Initialization Test
  • 6.5 Resource Manager Test
  • 6.6 Application Information Resource Test
  • 6.7 Date-time Information Resource Test
  • 6.8 CA Application Resource Test
  • 6.9 UTI Device TS Test
  • 7 Marking, packaging, transportation and storage
  • 7.1 Data Structure
  • 7.2 Transport Layer
  • 7.3 Session Layer
  • 7.4 Resource of Resource Manager
  • 7.5 Application Information Resources
  • 7.6 Date and Time Information Resources
  • 7.9 Hot Plugging/Unplugging Test
  • 8 Test report
  • 8.1 Introduction
  • 8.2 Resources
  • 8.3 Application Protocol Data Units (APDU)
  • 8.4 System Management Resources
  • 8.5 Host Control and Information Resources
  • 8.6 Man-Machine Interface Resource
  • 8.7 Resource Identifiers and Application Object Tags
  • 9.1 Electromagnetic Compatibility
  • 9.2 Safety
  • 9.3 Materials

1 Foreword

SJ/T 11743.2-2019 was issued by Ministry of Industry and Information Technology on 11 November 2019 and has been in force since 1 April 2020.

It is one of 7 parts of the SJ/T 11743 series.

The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the latest terms and definitions of piezoelectric and dielectric filters for frequency control and selection.

SJ/T 11743.2-2019 falls under ICS 31.140, in the field of electronics.

This catalogue holds 221 other SJ/T standards in that field.

In this catalogue, SJ/T standards carry edition years from 1980 to 2026.

3 About this standard

Sector: Electronics Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 12 pages (approximate)

Chinese original: about 18,193 characters

4 Related standards

Other parts of this standard:

SJ/T 11743.1-2019 — Part 1: Piezoelectric and dielectric resonators

SJ/T 11743.3-2019 — Part 3: Piezoelectric and dielectric oscillators

SJ/T 11743.4.1-2019 — Part 4-1: Materials Artificial quartz crystals

SJ/T 11743.4.2-2019 — Part 4-2: Materials Piezoceramics

SJ/T 11743.4.3-2019 — Part 4-3: Materials Materials for dielectric devices

SJ/T 11743.4.4-2019 — Part 4-4: Materials Materials for surface acoustic wave devices

Standards on related subjects:

GB/T 17737.100-2018 — Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements

GB/T 21711.1-2008 — Electromechanical elementary relays -- Part 1: General and safety requirements

5 Classification and status

International classification (ICS): 31.140

Chinese Standard Classification (CCS): L 21

Prefix SJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.

How to Download SJ/T 11743.2-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
12 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SJ/T 11743.2-2019

$385.00