SJ/T 11743.4.1-2019Piezoelectric and dielectric devices for frequency control and selection Terminology Part 4-1: Materials Artificial quartz crystals (English PDF)
频率控制与选择用压电和介电器件 术语 第4-1部分:材料 人造石英晶体
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for SJ/T 11743.4.1-2019 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2019
Implementation date
April 1, 2020
Scope
SJ/T 11743.4.1-2019 is the English-translated version of 频率控制与选择用压电和介电器件 术语 第4-1部分:材料 人造石英晶体.
SJ/T 11743.4.1-2019 is the Chinese standard "Piezoelectric and dielectric devices for frequency control and selection Terminology Part 4-1: Materials Artificial quartz crystals".
This standard specifies the latest terms and definitions used in the manufacture of artificial quartz crystals for frequency control and selection of piezoelectric elements. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — SJ/T 11743.4.1-2019
National Standard of the People's Republic of China
- ICS
- 31.140; 01.040.31
- Classification
- L21
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 1.1 Subject Contents
- 1.2 Application Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Height of Raised Access Floor
- 3.2 Abbreviations
- 3.3 Bearing of Four Conner
- 3.4 Systematically Resistance of Raised Access Floor
- 4 Requirements
- 4.1 Relation between the Host and the Device
- 4.2 UTI Interface
- 4.3 Requirements for the Physical Layer of UTI Device
- 4.4 Transport Stream Interface
- 4.5 Command Data Interface
- 4.6 Characteristic Requirements for UTI Physical Layer
- 5 Instruments, equipment, and materials
- 5.1 Diagram of Module in Connection with Host
- 5.2 DTV-CI Interface
- 5.4 Command Interface
- 5.5 Physical Requirement
- 5.6 UTI-HTU
- 5.7 Measuring Condition
- 6 Sample processing and determination
- 6.1 TSI-Physical, Link Layers
- 6.2 TSI-Transport Layer
- 6.3 TSI - Upper Layers
- 6.4 Initialization Test
- 6.5 Resource Manager Test
- 6.6 Application Information Resource Test
- 6.7 Date-time Information Resource Test
- 6.8 CA Application Resource Test
- 6.9 UTI Device TS Test
- 7 Marking, packaging, transportation and storage
- 7.1 Data Structure
- 7.2 Transport Layer
- 7.3 Session Layer
- 7.4 Resource of Resource Manager
- 7.5 Application Information Resources
- 7.6 Date and Time Information Resources
- 7.9 Hot Plugging/Unplugging Test
- 8 Test report
- 8.1 Introduction
- 8.2 Resources
- 8.3 Application Protocol Data Units (APDU)
- 8.4 System Management Resources
- 8.5 Host Control and Information Resources
- 8.6 Man-Machine Interface Resource
- 8.7 Resource Identifiers and Application Object Tags
- 9.1 Electromagnetic Compatibility
- 9.2 Safety
- 9.3 Materials
1 Foreword
SJ/T 11743.4.1-2019 was issued by Ministry of Industry and Information Technology on 11 November 2019 and has been in force since 1 April 2020.
It is one of 7 parts of the SJ/T 11743 series.
The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the latest terms and definitions used in the manufacture of artificial quartz crystals for frequency control and selection of piezoelectric elements.
SJ/T 11743.4.1-2019 falls under ICS 31.140; 01.040.31, in the field of electronics.
This catalogue holds 221 other SJ/T standards in that field.
In this catalogue, SJ/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Electronics Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 8 pages (approximate)
Chinese original: about 10,173 characters
4 Related standards
Other parts of this standard:
SJ/T 11743.1-2019 — Part 1: Piezoelectric and dielectric resonators
SJ/T 11743.2-2019 — Part 2: Piezoelectric and dielectric filters
SJ/T 11743.3-2019 — Part 3: Piezoelectric and dielectric oscillators
SJ/T 11743.4.2-2019 — Part 4-2: Materials Piezoceramics
SJ/T 11743.4.3-2019 — Part 4-3: Materials Materials for dielectric devices
SJ/T 11743.4.4-2019 — Part 4-4: Materials Materials for surface acoustic wave devices
Standards on related subjects:
GB/T 29197-2012 — Copper-clad aluminum wire
GB/T 21711.1-2008 — Electromechanical elementary relays -- Part 1: General and safety requirements
5 Classification and status
International classification (ICS): 31.140; 01.040.31
Chinese Standard Classification (CCS): L 21
Prefix SJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download SJ/T 11743.4.1-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SJ/T 11743.4.2-2019 — Piezoelectric and dielectric devices for frequency control and selection Terminology Part 4-2: Materials Piezoceramics
SJ/T 11743.3-2019 — Piezoelectric and dielectric devices for frequency control and selection Terminology Part 3: Piezoelectric and dielectric oscillators
SJ/T 11743.4.3-2019 — Piezoelectric and dielectric devices for frequency control and selection Terminology Part 4-3: Materials Materials for dielectric devices
SJ/T 11743.4.1-2019
$195.00